Toshiba 36A43, 32A43 owner manual Changing channels, Adding and erasing channels manually

3.Press y or z to highlight TV/CABLE.

4.Press x or • to highlight TV (if you use an antenna) or CABLE (if you use cable).

5.Press z to highlight CH PROGRAM.

SET UP				SET UP
LANGUAGE:				LANGUAGE:
	[ENGLISH] FRANCAIS ESPANOL				[ENGLISH] FRANCAIS ESPANOL
TV/CABLE:		[TV] CABLE		TV/CABLE:		[TV] CABLE
CH PROGRAM				CH PROGRAM
ADD/ERASE:		[ADD] ERASE		ADD/ERASE:		[ADD] ERASE
V-CHIP CONTROL				V-CHIP CONTROL
MORE				MORE
MOVE [	]	SELECT [	]	MOVE [	]	SELECT [	]

6.Press x or • to start automatic channel programming

(“CH PROGRAM” displays on-screen). The TV automatically cycles through every TV or cable channel (depending on which you selected), and stores all active channels in the TV’s memory.

7.When automatic channel programming is complete, the message “CH Programming Completed” appears.

8.Press CHANNEL ▲▼ to view the programmed channels.

Adding and erasing channels manually

After you have automatically programmed the channels into the TV’s memory, you can manually add and erase individual channels.

To add or erase a channel in the TV’s memory:

1.Tune the TV to the channel you want to add or erase. If you are adding a channel, you will need to use the CHANNEL NUMBERS to select the channel.

2.Press MENU.

3.Press x or • to highlight the SET UP menu.

4.Press y or z to highlight ADD/ERASE.

SET UP

LANGUAGE:
	[ENGLISH] FRANCAIS ESPANOL
TV/CABLE:		[TV] CABLE
CH PROGRAM
ADD/ERASE:		[ADD] ERASE
V-CHIP CONTROL
MORE
MOVE [	]	SELECT [	]

5.Press x or • to highlight ADD or ERASE, whichever function you want to perform.

6.Press MENU.

7.Repeat steps 1–6 for other channels you want to add or erase, or press EXIT to return to normal TV viewing.

Changing channels

To change to the next programmed channel:

Press CHANNEL yz.

To change to a specific channel (programmed or unprogrammed):

Press the CHANNEL NUMBERS (0–9 and 100).

Note: For channels 100 and higher, press the 100 button, and then the next two channel numbers (for example, to select channel 100, press 100 - 0 - 0; to select channel 125, press 100 - 2 - 5).

}Channel

Numbers

MENU

}stTS

EXIT

Channel yz

Introduction Connecting your TV

Using the Remote Control

Setting up your TV

Using the TVÕs Features

Appendix

17