Toshiba 20HLV15 appendix Selecting the video input source, Labeling the video input sources

Page 31

Selecting the video input source

Introduction

Press INPUT to view a signal from another device connected to your TV/ DVD, such as a VCR or DVD player. You can select ANT, VIDEO 1, VIDEO 2, ColorStream HD, HDMI or PC depending on which input jacks you used to connect your devices (see “Connecting your TV/DVD” on page 11).

SOURCE SELECTION

0 . ANT

1 . VIDEO1

2 . VIDEO2

3 . ColorStream HD

4 . HDMI

5 . PC

[0 - 5] : SELECT

Pressing INPUT on the remote control displays the current signal source (press INPUT again or 0-5 to change)

Please note the following regarding the HDMI source selection:

The HDMI IN jack is not intended for connection to and should not be used with a PC (personal computer). See “Connecting an HDMI or a DVI device to the HDMI input” on page 17 and “Con- necting a PC” on page 20 for details.

your

You also can use the Channel M / ? buttons to select the video input source. In addition to cycling through your programmed channels (page 24), the Channel M / ? buttons will also cycle through the video input sources, in the order illustrated below.

￿￿

￿￿￿￿

￿￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿

Labeling the video input sources

The video label feature allows you to label each input source for your TV/DVD from the following preset list of labels:

–: Uses the default label name VCR : Video cassette recorder DVD : DVD video

DTV : Digital TV set-top box

SAT : Satellite box

CBL : Cable box

INPUT

TV/DVDConnecting

your TV/DVDSetting up

To label the video input sources:

1.Press MENU, then press or to display the OPTION menu.

2.Press ▲ or ▼ to highlight VIDEO LABEL.

3.Press to display the VIDEO LABEL menu.

4.Press ▲ or ▼ to highlight the video source you want to label.

5.Press or to select the desired label for that input source.

6.Press EXIT to return to normal viewing.

OPTION

 

ON TIMER

OFF / OFF / SET

FAVORITE CH

 

CH LABEL

 

VIDEO LABEL

 

:SELECT

:ADJUST

VIDEO LABEL

 

 

 

1

. VIDEO1

 

- / VCR / DVD / DTV

2

. VIDEO2

 

-

SAT / CBL

3

. ColorStream

HD

-

 

4

. HDMI

 

-

 

 

:SELECT

 

 

:ADJUST

Exit

Menu

TV/DVD’s FeaturesUsing the

Setting the clock

You must set the clock before you can program the ON timer.

DVD

To set the clock: (Example: 8:30 AM)

1.Press MENU, then press or to display the SETUP menu.

2.Press ▲ or ▼ to highlight CLOCK SET.

3.Press to highlight the hour position.

4.Press ▲ or ▼ to set the hour, then press to highlight the minute position.

5.Press ▲ or ▼ to set the minutes, then press EXIT to return to normal viewing.

SETUP

 

LANGUAGE

ENGLISH

CLOCK SET

12 :00AM

TV / CABLE

CABLE

CH PROGRAM

 

ADD / ERASE

ADD

:SELECT

:ADJUST

SETUP

 

LANGUAGE

ENGLISH

CLOCK SET

8: 30 AM

TV / CABLE

CABLE

CH PROGRAM

 

ADD / ERASE

ADD

:SELECT

:ADJUST

 

31

Note:

If the power source for the TV/DVD is interrupted (for example, the power cord is unplugged or a power failure occurs), you will need to reset the clock.

Playback

Appendix

5U90221A(E)P31-32

31

5/31/05, 19:00

Page 30 Page 32
Image 31
Page 30 Page 32
Contents 20HLV15 Child Safety Location of the required Marking FCC compliance informationFederal Communications Commission FCC FCC Declaration of Conformity Compliance Statement PartS3126A AccessoriesDisc HeatLCD Moisture condensation may occur in the following situations PrecautionsNever use the unit when moisture condensation may occur Important notes about your LCD TVOn storing discs Structure of disc contentsOn cleaning discs On handling discsPlayable discs On Video CDsIntroduction Connecting your TV/DVDSetting up your TV/DVD Using the TV/DVD’s featuresExploring your new TV/DVD Selecting a location for the TV/DVD Connecting a VCRStereo VCR Option 1 For Subscribers to Basic Cable TV Service Connecting a cable converter box or AntennaOption 2 For Subscribers to Scrambled Cable TV Service Satellite Receiver Connecting a satellite receiver and a VCRStereo VCR For Hdmi connection, see Connecting a camcorder To connect an Hdmi device, you will need Connecting an Hdmi or a DVI device to the Hdmi inputTo connect a DVI device, you will need Dolby Digital Connecting an amplifier equipped with a DTS decoderDigital Theater Systems DTS Channel digital stereo Connecting an amplifier equipped with an Mpeg audio decoderConnecting an amplifier equipped with a digital audio input MPEG2 soundMonitor Display modes Connecting a PC Personal ComputerPower connection To use AC powerTo install the batteries Installing the remote control batteriesLearning about the remote control Setting up your TV/DVDPress Starting setupChanging the on-screen display language To select a languageAdding and erasing channels manually Game modeAdding channels to the TV/DVD’s memory Programming channels automaticallySwitching between two channels Adjusting the channel settingsProgramming your favorite channels To change your password Using the Locks menuSelecting a password To select your password and access the Locks menuUsing the V-Chip parental control feature Locking the video inputs Locking channelsUsing the panel lock feature Setting the GameTimerTMTo create channel labels Labeling channelsTo erase channel labels To label the video input sources Setting the clockSelecting the video input source Labeling the video input sourcesTo cancel the on timer Setting the on timerSet the desired minutes and channel As in step Full picture size for 169 source programs Selecting the picture sizeNatural picture size TheaterWide picture size for 43 format programsTo set the Cinema Mode to Video Selecting the cinema modeUsing the Aspect feature To set the Cinema Mode to FilmUsing the closed caption feature Setting the sleep timerMode Picture Quality Adjusting the pictureSelecting the picture mode Adjusting the picture qualitySelecting the color temperature Using the CableClear featureResetting your picture adjustments Selecting stereo/SAP broadcasts Adjusting the soundAdjusting the sound quality Muting the soundUsing the StableSound feature Resetting your audio adjustmentsUsing the WOW surround sound feature Displaying on-screen information Adjusting the back lighting featureAuto power off Understanding the Power Return featureBASS/TREBLE/BALANCE To adjust the sound quality of PC mode Picture/Audio adjustments in the PC modeResetting your picture/audio adjustments in the PC mode Description about Each Setting Option Picture menuPlaying a disc Resume featureBasic playback DVD VCD CD To remove the disc To start playback in the stop modeTo pause playback still mode To stop playbackLocating a chapter or track Playing in fast reverse or fast forward directionsPlaying frame by frame DVD VCD Playing in slow-motionLocating desired scene DVD VCD CD Zooming DVD VCDReturning to the scenes To cancel the MarkerMarking desired scenes DVD VCD Marking the scenesRepeat playback DVD VCD CD Introduction Your TV/DVDConnecting Your TV/DVDSetting upTo clear the program one by one Program playback VCD CDRandom playback VCD CD To change the programTitle selection Changing anglesDVD menu Subtitles Changing soundtrack language DVD VCDCase of Video CD playback Video CD Karaoke playbackDisc status DVD VCD CD To turn off the PBC VCDLimitations on display MP3/WMA/JPEG CD operationStandard, sampling frequency, and the bit rate About file menu MP3/WMA CD playback CDRotating an image Jpeg CD playback CDSlide show playback CD Customizing the function settings DVD function setupLanguage Setting detailsPicture Parental SoundOther Temporary disabling of parental level by DVD disc Appendix Language code listSymptom Solution TroubleshootingSymptom of DVD Solution Television SpecificationsDVD/CD Player Limited United States Warranty National Service Division
Top Page Image Contents