Setting up your TV/DVD
Adding channels to the TV/DVD’s memory
When you press CH M / ?, your TV/DVD will stop only on the channels you have stored in the TV/DVD’s channel memory. Follow the steps below to program channels into the channel memory.
Programming channels automatically
Your TV/DVD can automatically detect all active channels and store them in its memory. After the TV/DVD has stored the channels in its memory automatically, you can add or erase channels manually.
To add channels automatically:
1.Press MENU, then press 
or 
to display the SETUP menu.
2.Press ▲ or ▼ until the TV/CABLE
selection is highlighted. |
|
|
|
|
|
|
3. Press or to highlight either |
| S E T U P |
|
|
|
|
| L A N G U A G E | ENGLISH | ||||
TV or CABLE, depending on |
| |||||
| CLOCK SET | 12:00AM | ||||
| TV / CABLE | TV / | CABLE |
|
| |
which you use. |
| CH PROGRAM |
|
|
|
|
| ADD / ERASE | ADD | ||||
|
|
|
|
|
| |
If you use an antenna, choose TV. |
| :SELECT | :ADJUST | |||
If you use cable, choose CABLE. |
|
|
|
|
|
|
|
|
|
|
|
| |
4.Press ▼ until the CH PROGRAM selection is highlighted.
5.Press 
to start channel programming. The TV/DVD will automati- cally cycle through all the TV or Cable channels (depending on which you selected), and store all active channels in the channel memory. While the TV/DVD is cycling through the channels, the message “PROGRAMMING
6.When channel programming is complete, the message “COMPLETED” appears.
7.Press CH M / ? to view the programmed channels.
Adding and erasing channels manually
After you have programmed the channels automatically, you can add or erase specific channels manually.
To add or erase channels manually:
1.Select the channel you want to add or erase. If adding channels, you must select the channel to add using the Channel Number buttons.
2.Press MENU, then press 
or 
to display the SETUP menu.
|
|
|
|
|
|
|
3. | Press ▲ or ▼ to highlight ADD/ |
| ||||
| ||||||
| ERASE. |
|
| |||
4. | Press or to select ADD or |
|
| |||
| ERASE, whichever function you |
|
| |||
| want to perform. |
|
|
|
|
|
|
|
|
|
|
| |
|
| |||||
5. | Repeat steps |
| ||||
| you want to add or erase. |
|
|
|
|
|
|
|
|
|
|
| |
Changing channels
To change to the next programmed channel:
Press Channel M / ? on the TV/DVD or CH M / ? on the remote control.
To change to a specific channel (programmed or unprogrammed): Press the Channel Number buttons
Game mode
After connecting a TV Game to the unit, press GAME. The TV screen changes to the Game mode.
•The Game mode screen is adjusted to the suitable brightness for your eyes.
•If GAME is pressed during standby mode, the unit turns on automatically and the Game mode screen appears on the screen.
Channel
Numbers
Channel M ?
Menu
Game
In addition to cycling through your programmed channels, the Channel M/? buttons will also cycle through the video input sources (page 31) in the order illustrated below.
Note:
If the remote controller does not operate your TV/DVD, press the TV button and operate again.
24
24 | 5/31/05, 18:59 |