Toshiba 32ZT29B For Your Guidance, To check that you have the best colour…, AV connections

FOR YOUR GUIDANCE

Questions and Answers…

Remember
?	…
For television
operation
queries,
please
ring the
helpline…

If you experience what seem like problems operating your TV, we

recommend you read through the simple checks below and on pages 39 and 40 before calling the helpline.

Q	Why is there no sound or picture?			Q There IS a picture, but why is there little or no colour?
	Check that the mains switch is on and check all the				When using an external source, for instance, a poor
A connections. Press the Standby button ion the				A quality video tape, if there is little or no colour,
remote control to make sure that the TV is not in Standby				improvements may sometimes be achieved. The
mode. Press a number button on the remote control to				television is factory set to AUTO in the Set up menu to
cancel any Timer off setting.				automatically display the best colour system.
Q				To check that you have the best colour…
	Why am I not receiving a clear digital picture?				From the Set up menu select Colour.
A Check the signal level.			1
Press the DTV MENU button then with the Q or P
button highlight Setup and press SELECT. Then highlight
Manual Tune and press SELECT.						Set up
							Colour		▼	AUTO	▼
As long as the signal level bar is green the signal is good.							Auto tuning				▼
If the bar is yellow/red the signal is poor and you should							Manual tuning				▼
contact your aerial technician.							Programme sorting				▼
Q							Teletext				▼
	Why does the picture and sound breakup ‘mosaic’
	or the image freeze?						EXIT	: To exit
	Check the signal level in Manual Tune.				With the Sor Rbutton, choose between AUTO,
A Check the aerial. You may have to contact your			2
					PAL, SECAM, NTSC 4. 43 or 3. 58.
aerial technician to re-position the aerial.			Q
Check the connections and cables. The cables may be							Why has the screen turned blue?
defective and require replacement.
	Why can’t I see the DTV MAIN MENU				Blue screen in the Feature menu is ON. When
Q				A no signal is being received, the TV will turn off the
	You are in analogue mode. Press the ATV/DTV			sound and switch the TV screen to blue. After 20 minutes
				the TV will switch to Standby mode.
A button.
			Q Why is the video recorder/DVD picture in black and white?
Q	Why can’t the digital text service be seen?
	The digital programme you are on is not broadcasting				Check that the correct input has been chosen. See
				A AV connections.
A digital text. Try another digital programme.
			Q
Q Why does the LOCKED CHANNEL display come up?						Why can’t I see the video tape/DVD I am playing?
					Make sure you have connected the VCR/DVD player
	You have chosen to Lock the programme. See the			A using a Scart lead and see page 37 for
A Parental control pages.				connections.
Q	Why is the video picture good but there is no sound?		Q				Can anything else cause a poor picture?
A	Check the Scart lead connection.				Yes. You must ensure that the aerial lead is
		38
				A connected directly to the TV and not the VCR.