Changing your PIN code, To disable blocking

Using the TVÕs Features

(Continued from previous page)

5.Use the CHANNEL NUMBERS (0–9) to enter your four-digit PIN code. After the code is entered, the V-Chip Control menu appears.

SET UP

ENABLE BLOCKING [Y] N

SET RATING

SET BLOCKING OPTIONS

NEW PIN CODE

BLOCK CHANNEL

MOVE [

] SELECT [

]

V-Chip Control (Blocking) Menu

6.Press y or z to highlight ENABLE BLOCKING.

7.Press x or • to highlight “Y,” which enables all blocking by activat- ing the V-Chip. See “Blocking programs by ratings” on page 21, “Blocking unrated movies and programs” on page 23.

Note: The ÒBlocking channelsÓ feature (page 24) is not affected by the ÒEnable BlockingÓ setting.

To disable blocking:

Highlight “N” in step 7, above, to deactivate the V-Chip Control feature and disable blocking.

Changing your PIN code

1.Press MENU.

2.Press x or • to highlight the SET UP menu.

3.Press y or z to highlight V-CHIP CONTROL.

4.Press x or • to display the PIN code entering screen.

5.Use the Channel Number buttons (0–9) to enter your existing PIN code. After the code is entered, the V-Chip Control menu appears.

6.Press y or z to highlight NEW PIN CODE.

7.Press x or • to display the New PIN Code entering screen.

	SET UP	SET UP
	ENABLE BLOCKING [Y] N	PLEASE ENTER NEW PIN CODE
	SET RATING	PLEASE ENTER NEW PIN CODE
	SET RATING	_ _ _ _
	SET BLOCKING OPTIONS	_ _ _ _
	NEW PIN CODE
	BLOCK CHANNEL
	MOVE [ ] SELECT [ ]	SELECT [0–9] END [EXIT]

8.Use the CHANNEL NUMBERS (0–9) to enter a new PIN code. After the new code is entered, the V-Chip Control menu appears.

9.Press EXIT to return to normal TV viewing.

RECALL	MUTE	POWER
RECALL	MUTE
	o
			RECALL
1	2	3
4	5	6
			CHANNEL
7	8	9	NUMBERS
7	8	9
		CH RTN
100	0	ENT
			MENU
	CH
VOL	MENU/	VOL	yz x •
	ENTER
	CH
TV
CABLE			EXIT
VCR	EXIT		EXIT
	EXIT

If you forget your PIN code

1.Press MENU.

2.Press x or • to highlight the SET UP menu.

3.Press y or z to highlight V-CHIP CONTROL.

4.Press x or • to display the PIN code entering screen.

5.While the PIN code entering screen is displayed, press RECALL four times within five seconds. The “Blocking Is Reset” screen appears.

SET UP

BLOCKING IS RESET

PLEASE ENTER NEW PIN CODE

_ _ _ _

SELECT [0–9] END [EXIT]

6.Use the CHANNEL NUMBERS

(0–9) to enter a new PIN code. After the new code is entered, the V-Chip Control menu appears.

7.Press EXIT to return to normal TV viewing.