SPECIAL SOUND FEATURES
Dolby Digital
Dolby Digital is available from DVD players, some games console players, etc. These must be connected using a Scart or phono lead for the picture AND an optical or a coaxial cable for the sound see page 23.
Dolby Digital
Arrange the speakers around your normal viewing positions (as shown on page 5) and then make sure that the TV is set up as follows:
1 | The DVD is connected to the TV using phono leads to | |||||
| the COMPONENT VIDEO INPUT or a Scart lead to | |||||
| Scart 3, and an optical or coaxial cable to the | |||||
| optical/coaxial sockets, | |||||
2 | The Digital input in the AV CONNECTION | |||||
| menu (see page 22) is set to EXT3 if Scart 3 is used | |||||
| or EXT4 if the DVD is connected to COMPONENT | |||||
| VIDEO INPUT. | |||||
3 | If external front speakers are |
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
| ||
|
|
|
|
| ||
| connected the external switch (found on the back of | |||||
| the TV) is set to EXT. | |||||
4 | Rear speakers are connected and the Rear | |||||
| Speaker option in the Surround set up menu | |||||
is set to YES.
DELAY TIME…
If you sit a long way from the TV and close to the rear speakers the sound from the rear will reach you before the sound from the front. You can use a higher setting in the Delay time option to restore the correct balance.
1 | From the FEATURE MENU select Surround set |
| up. |
2 | With Delay time highlighted, use the S or R button |
| to change the setting to a value that suits you. |
3 | Press EXIT when you have finished. |
! | If |
|
|
|
| rear speakers |
|
| |
|
| are NOT | ||
selected in the |
|
| ||
|
| Surround |
| |
menu, |
| set up | ||
| you will |
|
| |
from your | not hear any | sound | ||
rear speakers. |
| |||
|
|
|
| |
☛ Alternatively, | |||
Test mode | in the | ||
| SET | ||
SURROUND | |||
| |||
. |
|
| |
menu |
|
| |
use the UP
| Adjustments |
1 | Set the volume and balance of the front speakers to your preference. |
2 | Play a Dolby Digital source and press the Mbutton on the TV’s remote control. |
| The title, e.g. Dolby Digital 3/2, is an indication of the channels available from |
| your current sound source, see the table. |
3 | To adjust the levels, use the P or Q button to select the centre and two rear |
| speakers in turn. Press either the S or Rbutton to adjust. The number of |
| adjustable speakers will depend upon the signal received from the DVD player. |
4 | To cancel the test press the EXIT button. |
! | If the DVD | playing is recorded | in Dolby Pro Logic, | ||||||||
| right, centre and | ||||||||||
i.e. 4 channel stereo (front left, front | |||||||||||
| . |
|
| ||||||||
|
|
|
|
|
|
|
|
|
| ||
rear) the TV will detect the 4 channels | Test Mode is | ||||||||||
In this instance, | when the Surround | ||||||||||
| in use. | ||||||||||
| the four channels | ||||||||||
run the TV will cycle through | |||||||||||
| |||||||||||
|
|
|
| the DVD | |||||||
| In order to get full Dolby Digital, | ||||||||||
|
|
|
| ||||||||
| player must be connected | using the coaxial or | |||||||||
| optical links. |
|
|
|
|
|
|
|
| ||
Dolby Digital
1/0 = Centre speaker only.
2/0 = Front Left and Front Right only. 2/1 = Front Left and Front Right +
Rear Left and Rear Right combined. 2/2 = Front Left and Front Right +
Independent Rear Left and Independent Rear Right. 3/0 = Front Left and Front Right and Centre.
No Rear Speakers.
3/1 = Front Left and Front Right and Centre + Rear Left and Rear Right combined.
3/2 = Front Left and Front Right and Centre + Independent Rear Left and Independent Rear Right.
15