Toshiba 32ZP18P, 36ZP18P owner manual Connecting the speakers

Page 5

SETTING UP

Connecting the speakers

!

WARNING: do

 

attempt to

external

share

 

speakers

with your

 

 

Hi

serious

-Fi as

 

damage

may occur.

 

not

In order to enjoy the full benefits of Surround Sound it is necessary to connect two rear surround speakers and two front extension speakers.

When connecting external Hi-Fi speakers, they must be 8 ohm, 10W minimum. The front speakers should be positioned either side of the TV and will deliver the left and right sound. The internal speakers will then deliver the centre channel required to enjoy Dolby Digital.

When connecting external speakers always make sure that the power is OFF.

Extension Front Speaker connections

To connect extension front speakers simply press the

connector and insert the cable. You must now set the switch

to EXT as shown.

Always make sure that the lead with the stripe (or raised edge) is connected to the RED terminal and the other (smooth) lead is connected to the BLACK terminal.

Don’t forget to set the switch to EXT.

Main

Speaker

Main

TV Speaker

These are suggested

positions only.

Place your speakers to

suit and adjust the

balance as necessary.

Surround

Surround

Speaker

Speaker

Surround Speaker connections

To connect surround speakers simply press the connector and insert the cable. These speakers should be sited in line with the normal viewing position

KSURROUND 8

5

Image 5
Contents Toshiba Contents Air Circulation… For your safetyBatteries... and the effective range of the remote… Your new television’s remote controlToshiba DVD player Or 2 digit Programme selectionConnecting the speakers …and switching your new TV on… Connecting and turning on your new TVTV back connections… AnalogueTo select your language… Choosing the language and system Auto tuneYou can now run Auto tune… Ra nceFor Continental Europe only… UK and Continental Europe settingsFor the UK only… ChannelManual tune… Manually tuning your TVSET UP Skipping programmes… Remote controlSwapping programme positions Programme skip General controls Bass, treble and balance adjustments…Sound control… SameUse this setting when watching a 149 broadcast When subtitles are included on aWidescreen viewing Cinema eliminate or reduce the black barsPicture size/position Picture size/position settings Picture adjustmentsWSS Widescreen Signalling Feature MenuPicture preferences Scan ModeDNR Digital Noise Reduction Picture StillDolby Digital AdjustmentsDolby Digital Surround SET UP Surround Test ModeDolby Pro Logic Dolby Pro LogicDigital Surround Processor Surround Sound FeaturesSelecting characters and modes Teletext setting upAbout teletext TeletextSelecting pages TeletextAuto ListTeletext Control buttons Using the buttons on the remote control…Stereo and Bilingual transmissions… Timer…and Bilingual Will stay on until the setAV Connection AV connections and input selectionHere Back connectionsFront connections… Front connections and controlsFront controls… Owner’sOn-screen menus Using the MenusIndex Manual fine tuningCheck that Panel lock is not on …Check the speaker switch has been set to EXTToshiba Information Systems U.K. Limited Subject