Using the Remote Control
Using the remote control
Learning about the remote control
POWER turns the TV on and off (standby mode*)
MUTE turns off the sound (page 26)
RECALL displays TV settings
MTS selects stereo or SAP sound (page 26)
TV/VIDEO selects the video input source (page 20)
Channel Numbers
yz x • select or adjust menu items (page 17)
CH yz cycles through programmed channels (page 18) VOL - + adjusts the volume level
CCselects the Caption or Text mode (page 25)
MENU opens the menu system (page 17)
EXIT exits the menu system (page 17)
SLEEP accesses to the automatic TV
SOUND selects the sound mode (page 27)
cycles through favorite channels (page 19)
MUTE POWER
TV/VIDEO MTS RECALL
1 2 3
4 5 6
7 8 9
CH RTN
0100/
CH
VOL ENTER VOL
CH
EXIT MENU CC
SOUND PICTURE SLEEP
FAV. CH
Installing the remote control batteries
To install the batteries:
1.Open the battery cover on the back of the remote control.
2.Install two batteries (R6 size “AA”). Match the + and – signs on the batteries to the signs on the battery compartment.
3.Replace the battery cover on the remote control until the lock snaps.
Remote control effective range
Caution:
Never throw batteries into a fire.
Note:
•Be sure to use AA size batteries.
•Dispose of batteries in a designated disposal area.
•Batteries should always be disposed of with the environment in mind. Always dispose of batteries in accordance with applicable laws and regulations.
•If the remote control does not operate correctly, or if the operating range becomes reduced, replace batteries with new ones.
•When necessary to replace batteries in the remote control, always replace both batteries with new ones. Never mix battery types or use new and used batteries in combination.
•Always remove batteries from remote control if they are dead or if the remote control is not to be used for an extended period of time. This will prevent battery acid from leaking into the battery compartment.
* The TV is in standby mode when the power is OFF but the power cord is still plugged into an outlet.
16