Toshiba WLT68 owner manual Analogue manual tune Auto tune, Using Auto tuning, Press OK to store

8When your media recorder signal is found, press R to move along to Station. With P, Q, S and R put in the required characters, e.g. VCR.

Manual tuning

Station

9Press OK to store.

10Repeat for each programme position you want to tune or, press MENU to return to the list of channels and select the next number to tune.

11Press EXIT when you have finished.

12To name external equipment, e.g. DVD on EXT2, press Bto select EXT2, then select Manual setting from the SET UP menu.

13Press Rto select Label then using P, Q, S and R put in the required characters. Press OK.

Manual setting

Label

This television has direct channel entry if the channel numbers are known.

Select the Manual tuning screen in Step 3. Enter the Programme number, the System, then C for standard (terrestrial) channels or S for cable channels and the Channel number. Press OK to store.

Using Auto tuning

1To set up the television using Auto tuning, press MENU and use S or R to select the SET UP menu.

2Press Q to highlight Language and S or R to select.

3Using Q highlight Country, then Sor Rto select. The television will now tune the stations for your country.

4Press Q to highlight Auto tuning, then press OK.

Auto tuning

! Previous settings will be lost ! Press EXIT for no change. Press OK to start Auto tune.

5To start Auto tuning press OK.

You must allow the television to complete the search.

When the search is complete the television will automatically select programme position 1. This may not be a clear picture, so the station order can be changed (see 'Sorting programme positions' section).