Toshiba WLT68 Input selection AV connections, Analogue switch-off, Input signal selection

Page 32

Input selection and

AV connections

Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 6 for a clear view of the back connection recommendations.

Most media recorders and decoders send a signal through the SCART lead to switch the television to the correct Input socket.

Alternatively press the external source selection button Buntil the picture from connected equipment is shown.

This button must be used to view equipment connected using the COMPONENT VIDEO INPUT (EXT3C).

An S in the display e.g. B2S (EXT 2S), indicates the input is set for an S-Video signal.

Input selection

Use the Input Selection if the television does not switch

over automatically.

1Press Bto select B1, B2, B3C (EXT1-3),HDMI1, HDMI2, HDMI3 or PC.

HDMI™ displays equipment connected to Input HDMI on the back of the television. It is designed for best performance with 1080i high definition signals.

PC displays a computer connected to Input RGB/PC on the back of the television.

2To return to television mode press and hold B and then select DTV or ATV.

Analogue switch-off

This is a digital television which is integrated to allow the use of both digital and analogue services. However, during the lifetime of this set it is very likely that analogue services will be switched off to allow for more new digital services.

This ‘switch-off’ will happen in a number of phases, which will be advertised in your area well in advance. It is recommended that at each phase the television is re-tuned to ensure that existing and new digital services can be viewed without disruption

(see the 'Auto tuning' section).

INPUT signal selection

This specifies the type of signal going into SCART 2 (EXT2)

on the back of the television. Please refer to the

manufacturers instructions for the connected equipment.

1In the SET UP menu press Q until

AV connection is highlighted, then press OK.


	SET UP		1/2
Language			English
Country			UK
Auto tuning			OK
Manual tuning			OK
Antenna Amplifier			On
AV connection			OK

MENU Back	EXIT Watch TV

2With S or R select either AV or S-VIDEOas the required input for EXT2.

	AV connection

PC/HDMI1 audio		PC
HDMI1 audio		Digital
EXT1 output		DTV
EXT2 input		AV

EXT2 output		DTV
Woofer		Internal

MENU Back	EXIT Watch TV

If the colour is missing try the alternative setting.

32

Image 32

Contents Toshiba Contents Safety Precautions Air CirculationHeat Damage Mains SupplyInstallation and important information Where to installPlease take note Side ViewRemote controlUP Inserting batteries and effective range of the remoteConnecting external equipment Aerial cablesScart leads Always activeConnecting a computer Signal information for Mini D-sub 15 pin connectorSignal name Pin No Please NoteSwitching on Using the remote controlUsing the controls and connections Controls and input connectionsTuning Digital television for the first time Press OK to start tuningAuto Tuning ProgressDigital auto tuning Auto tuningTelevision will start to search for all available stations HDMI1 B3C DTV ATV HDMI3 HDMI2Digital programme sorting Manual tuning Manual tuningSelect Manual tuning from the Setup Menu and press OK Programme sortingTuning Analogue mode for the first time Auto tuningManual tuning Select your languageSET UP Analogue manual tuneUsing Auto tuning Press Exit when you have finishedManual setting Analogue manual tune Auto tuneSelect Manual tuning from the SET UP menu Analogue programme skip, sorting programme positionsProgramme skip Sorting programme positionsSelecting programme positions Stereo and Bilingual transmissionsTime Display analogue only Sound controlsSound controls , SRS WOW sound Effects, dual, stable sound Bass boostSRS WOW sound effects Dual analogue onlyWidescreen viewing Super Live149 Super Live 2 Cinema 2 Super Live 1 Cinema 1 SubtitlePicture controls Picture position analogue onlyBack light Picture positionPicture preferences Black stretchMpeg NR Noise Reduction DNR Digital Noise ReductionColour temperature Base colour adjustmentBase colour adjustment Colour managementCinema mode Active Backlight ControlActive Vision M100 Antenna amplifierPicture controls Panel lock Timers Programme timer digital onlySleep timer Press Menu and S or R to select the Timer MenuDigital on-screen information Programme Guide InformationGuide Krypto the SuperdogMode Digital settings parental controlSetting the PIN Feature Menu press P or Q to select Encrypted Programmes Selecting favourite programmesLocking programmes Encrypted programmesReset TV Audio languagesAudio output SubtitlesDigital settings Software upgradeAuto Upgrade VersionClock phase ResetPicture position Sampling clockAnalogue switch-off Input signal selectionInput selection AV connections Input selectionInput selection and AV connections PC audioHDMI1 audio Highlight PC/HDMI1 audio then use to Rselect the PC optionNavigating pages using Auto Navigating pages using ListSelecting modes Text informationDigital interactive services For use with P fand P eto view sub-pages when availableWith P or Q choose between Auto., PAL, SECAM, Ntsc 4 or 3 Analogue mode is selected. Press and hold Bto select DTV Lock Menu has been enabled see Parental ControlsProgs or change channels by using the number buttons Sampling clock and adjust until the lines clearCleaning the screen and cabinet… For your own records Specifications and accessories