Frequently asked questions
"F" messages
The message F 10 or F 17 appears in the display.
No water is dispensed.
–The water tank is not inserted properly. Take it out and reinsert correctly.
–The water tank was not filled correctly during the descaling process. Fill the water tank up to the correct mark.
–After fixing the fault, the machine turns off then on again. Start the desired preparation again.
–If the message still appears contact Technical Service.
The message F 73 shows or "Check brew unit" appears in the display.
The brew unit is clogged and cannot reset to the correct position.
–Select "Clear".
–Take out and clean the brew unit. See "Cleaning and Care - Brew unit".
–Reinsert the brew unit and close the door.
–If the message still shows contact Technical Service.
The message "Too much ground coffee" appears in the display.
If too much ground coffee passes through the coffee chute the machine is unable to process it so it can be emptied into the waste container.
– Select "OK".
The machine is now ready for use.
52
