Frequently asked questions
Preparing / dispensing problems
No water, steam or milk is dispensed from the froth dispenser.
–The water tank is not correctly inserted.
–The dispenser is clogged.
–Take out the water tank and reinsert it.
–Clean the froth dispenser as described in "Cleaning and Care - Froth dispenser/Intake hose".
The grinding sounds louder than usual.
There could be pebbles within the coffee beans.
Turn off the unit immediately. Contact the Miele's Tech. Service.
The grinding is quieter than usual.
The coffee bean container is empty. The respective message appears in the display.
Wait until no sound is heard and refill the coffee bean container.
The coffee/espresso flows too fast into the cup.
The grind control is set too coarse.
Set the grind control to a finer grind.
The coffee/espresso flows too slow into the cup.
The grind control is set too fine.
Set the grind control to a coarser grind.
The coffee/espresso is not hot enough.
–Were the supply lines
–The temperature is set too low.
–Check if the brew unit is clogged.
–The smaller the cup, the more important it is to
–Check on what temperature range the coffee type is set.
–Clean the brew unit.
No drink is prepared although the beans were grinded and enough water is in the container.
–The grind control is set to the finest or the grind amount is set to the maximum.
–The process is timed, the process might need so long, there is no time for brewing any more.
–Set the grind control or the grind amount to a different position.
48
