Cleaning and Care
Froth dispenser/Intake hose
Clean the froth dispenser after each use, otherwise it may become blocked with dried milk and hard to clean.
Rinsing does not replace cleaning in the dishwasher.
Select "Care".
Select "System rinse".
Set a glass with water under the intake hose and select "OK".
The intake hose takes in the water and rinses it.
Cleaning in the dishwasher
To clean the froth dispenser in the dishwasher, take the parts from the machine. Regular cleaning in the dishwasher is important, so that the froth dispenser does not clog over time, when milk is not removed during rinsing.
Turn the cover above the spout to the left, .
Pull the froth dispenser out of the machine, , holding it by the spout and the intake hose.
Pull all pieces apart. Remove the piece with the gaskets by turning and pulling it apart.
Insert the pieces in the dishwasher and then lubricate the gaskets with the supplied silicone grease.
Take care that the small holes of the single pieces are not clogged (see arrow).
Pinch the soft parts to loosen the soiling, then blow them out.
Do not use a needle to remove residues, the parts may get damaged.
41
