Settings
Steam system
The appliance has two heating systems. They allow for independent preparation of froth/cappuccino or espresso/coffee. The second heating system can be turned off to save energy during the heating phase e.g. if froth is not prepared very often.
When the steam system is turned off and froth or cappuccino is selected, the unit must heat up first to produce steam.
As long as the coffee system was not completely turned off, the steam system is on.
The steam system is turned on by default.
To turn the steam system off
Select "Settings".
Select "Steam system".
The second line shows if the steam system is turned on or off.
Select "On" or "Off" and then "OK" to save the setting.
Lighting
Lighting sets the type of light used when the appliance is turned on. The lighting can be turned on/off automatically or dimmed to the desired brightness. The dimming functions can be set independently for the upper or lower lighting.
Caution! Do not look directly or with an optical instrument into the lighting. Laser!
To change the lighting
Select "Settings" and then "more".
Select "Lighting".
Select "On during use" or "Dimming".
On during use
On: The lighting turns on and off when the unit is turned on and off.
Off: The lighting stays turned off.
Dimming
The brightness of the upper and lower lighting can be set independently of each other.
Select "Top" or "Bottom".
Set the brightness by selecting the center touch control to the left or right.
Select "OK" to save the selection.
Select "Clear" to get back to "Settings".
26
