Toshiba SD-W1101 installation instructions Checking Your KIT Packaging, System Requirement

SD-W1101 DVD-RAM

with REALmagic Hollywood+ Playback Card

Installation Instructions

Congratulations on your purchase of a Toshiba SD-W1101 DVD-RAM drive and REALmagic Hollywood+ DVD/MPEG-2 Playback Card Kit. The following information will help you in the simple installation of your new DVD-RAM. If you are not replacing a presently installed SCSI CD-ROM with the enclosed DVD-RAM, additional installation hardware may be required. Refer to REALmagic Hollywood+ User’s Guide for installation instructions on the DVD/MPEG-2 Playback Card.

CHECKING YOUR KIT PACKAGING

Please unpack your DVD kit, and assure that you have the following items:

lDVD/MPEG-2 PCI Playback Card (compatible with all graphics cards)

l13” 3.5mm ext. audio cable

l14” HDB15 - 9 DIN overlay cable

lS-Video to RCA video converter cable

lREALmagic™ Accessory Kit envelope

(with software, demo CD and Playback Card User’s Guide)

Additional items you may need that are not included in the kit are:

lScrewdriver

lmounting screws and mounting hardware

lSCSI interface cable

lSCSI host adapter board

lDVD/CD-ROM Sound Cable

SYSTEM REQUIREMENT

The DVD-RAM kit requires the following:

✔2MB of free hard disk space

✔16MB of RAM

✔Pentium-based PC (or compatible), 133MHz or higher

✔PCI 2.1 compliant expansion slot

✔VGA Card

✔Plug and Play BIOS support

✔Microsoft™ Windows 95 or higher

✔Amplified stereo speakers

1