Chapter 10

Error messages

●Out-of-paper message

●Other error messages

Out-of-paper message

●If the In tray contains paper

●If the In tray is empty

If the In tray contains paper

1Verify the following:

–A sufficient amount of paper is in the In tray (at least ten sheets).

–The In tray is not overly full.

–The paper stack is touching the back of the In tray.

2Slide the paper guide so it fits firmly against the edge of the paper.

3Press the Resume button to continue printing.

If the In tray is empty

1Load paper in the tray.

2Press the Resume button to continue printing.

Other error messages

●“There was an error writing to USB port”

●“There was an error writing to LPT1”

●“Two-way communication cannot be established” or “Printer not responding”

“There was an error writing to USB port”

The printer might not be receiving correct data from another USB device or USB hub. Connect the printer directly to the USB port on the computer.

“There was an error writing to LPT1”

The USB cable might not have been attached before installing the printer software.

82

HP Deskjet 5700 Series