Note also that if the amplifier has been disconnected from the AC mains power by depressing the front panel power button, it cannot respond to a remote
3INDICATOR LIGHTS
The power indicator light (above the small power button, below the large standby button) is normally either on or off, indicating whether AC power is being supplied to the amplifier. It will blink on and off if the amplifier’s protection circuitry has been engaged (shutting the amp off to protect itself and/or your loudspeakers). In the unlikely event that you see the power indicator blinking, disconnect the amplifier from AC power and call your dealer for assistance in solving the problem.
The standby indicator light (above the large standby button) glows either amber or red, depending on the operational status of your amplifier. Amber indicates that the amplifier is on and ready to be used. When the indicator light is glowing red, the unit is in standby. If the standby indicator light is completely off, the amplifier is not receiving power. Check your AC connec- tions and the
13
