Madrigal Imaging Five Channel Amplifier manual Repeat this procedure for all remaining channels

Caution!

7SPEAKER OUTPUTS & BINDING POSTS

The Proceed amplifier is equipped with gold-plated, high-current binding posts for output termination to a loudspeaker system. To take full advantage of the AMP’s sonic quality, we recommend using high-qualityÊ speaker cable; see your Proceed dealer.

NEVER connect the amplifier output terminals to any device other than a loudspeaker.

NEVER short-circuit the amplifier’s output terminals.

There are two recommended methods for connecting speaker cables to the amplifier. A high-qualityÊ spade lug or hook lug, soldered to the cable (or crimped with extremely high pressure), is best.

Spade lug Hook lug

For each channel in turn, connect the left-channel – (negative or black) out- put post of the amplifier to the – (negative or black) input terminal of the appropriate loudspeaker.

Then connect the + (positive or red) output post of the amplifier to the + (positive or red) input terminal of the appropriate loudspeaker.

Repeat this procedure for all remaining channels.

17