Unpacking
Placement
Ventilation
PRECAUTION
Unpacking and Placement
Unpack your Proceed® Five Channel Amplifier and keep all packing materials for future transport. Shipment of the amplifier without the original packing material is not recommended, as it is heavy enough to make improvised packag- ing impractical. Locate and remove all accessory items from the cartons, and store teh cartons for possible future use.
Carefully inspect the product for shipping damage. If you discover any, see your Proceed dealer immediately.
Your Proceed amplifier may be placed either near the preamplifier/control center or near the loudspeakers. It may be placed on a shelf or in a cabinet where it is convenient to operate.
Note that adequate clearance for the AC cord and connecting cables must be left behind your amplifier. We suggest leaving at least three inches of free space behind your amplifier to allow all cables sufficient room to bend without crimping or undue strain.
Be sure to allow 2 to 3 inches of clearance above your amplifier to allow heat dissipation through air circulation. The vents on both the bottom and the top of the amplifier must be kept free from any obstruction which would reduce the flow of air through the unit. The best rule of thumb is this: if the top of your am- plifier is too hot to touch when “idle,” it needs better ventilation. If so, consider drilling holes in the supporting shelf under the amplifier to promote
Open equipment racks are generally best for power amplifiers, as they allow ample ventilation. If your amplifier must be located inside a cabinet which re- stricts airflow, consider using some fans to increase ventilation.
Avoid placement on soft surfaces such as carpeting. If you prefer to have the am- plifier on the floor near your loudspeakers, be sure to place it on a firm surface. (A piece of tempered glass under the amplifier is aesthetically unobtrusive while providing firm support and allowing the required ventilation.)
Mechanical drawings are included in this manual to facilitate special installations and custom cabinet work (see “Dimensions” at the end of this manual).
For your protection, review “Important Safety Instructions” before you install your amplifier.
6
