Madrigal Imaging Five Channel Amplifier Operating Voltage, five channel amplifier, Pr O C E E Dr

note the serial number

amplifier bottom-panel label

Operating Voltage

The Proceed amplifier is factory-set for 100V, 120V, 220V, or 240V AC mains opera- tion at either 50 or 60 Hz, according to the country for which the unit was manu- factured. (230V in European Union countries, in compliance with CE regulations.) Make sure that the label on the rear panel of the amplifier indicates the correct AC operating voltage for your location. The operating voltage cannot be changed by the user, and any attempt to do so will void the warranty.

If the voltage indicated does not match the service in your area, see your Pro- ceed dealer.

While you are checking the voltage, it would probably be a good idea to make a record of the serial number for your amplifier. This can be found on the label found on the bottom of the amplifier.

WARNING: BEFORE ATTEMPTING TO OPERATE THIS

DEVICE, REFER TO OWNER'S MANUAL FOR PROPER

OPERATING INSTRUCTIONS AND SAFETY PRECAUTIONS.

HAZARDOUS VOLTAGE AVAILABLE INSIDE; DISCONNECT

AC ~ MAINS CABLE BEFORE OPENING UNIT.

PR O C E E DR five channel amplifier

S/N

MADRIGAL AUDIO LABORATORIES, INC.

designed and manufactured in USA

No User Serviceable Components Inside. For service, contact Madrigal Audio Laboratories or an Authorized Dealer. Any modifications to this equipment will void all warranties.

Manufactured under license from Lucasfilm Ltd. Additionally licensed under the following patents: U.S. number 5,043,970; 5,189,703; and 5,222,059. Foreign patents pending. Lucasfilm THX Audio, Lucasfilm, and Home THX Cinema are registered trademarks of Lucasfilm Ltd.

7