Yeoman YMMB Removal Of The Grate, Installation Instructions, 4.7Do not modify the baffle system

INSTALLATION INSTRUCTIONS

4.4To remove the baffle:

—Open door.

—Lift the front edge of the baffle to clear the support bars.

—Pull the baffle forward to disengage the rear edge from the location above the secondary air inlet holes.

—Rotate the baffle and remove through the door opening.

—Replace in reverse order.

4.5It is important to remove the clean baffle system to ensure the flue ways are clear of soot and debris and to ensure the safe and efficient operation of the stove. The frequency of cleaning will depend on the stove operating conditions.

4.6The baffle system is designed to give safe and efficient operation of the stove. Replace damaged baffle immediately.

4.7Do not modify the baffle system.

5.REMOVAL OF THE GRATE

5.1To remove the grate:

—Remove the ashpan from under the grate.

—Remove the log guard.

—Unscrew the nut and bolt from the riddling rod using a 10mm A/F spanner as shown in Diagram 6.

6

Bolt

Riddling Rod Nut

PR9041

—Lift and rotate the centre grate (see Diagram 7).

7

Centre grate

PR9042

—Remove the main grate by lifting the front and rotating it through the front of the stove (see Diagram 8).

8

Grate

PR9043

5.3Riddling Rod Removal:

Remove the M5 Grub Screw using a suitable 2.5 A/F Hex Key.

Remove Handle and rod through the appliance front, See Diagram 9.

9

M5 Grub

Screw

PR9044

5.2Replace in reverse order.

21