Yeoman YMMB manual Annual Service

MAINTENANCE and SERVICING

For a complete list of spare parts and accessories contact your Yeoman retailer or call 01392 474011

1.ANNUAL SERVICE

1.1Before the start of the heating season strip, inspect and clean the appliance as detailed:

—Allow appliance to cool.

—Remove all internal parts; baffle, log guard, grate system and ashpan (see Installation Instructions).

—Sweep the flue at this point if necessary.

—Vacuum clean any remaining ash and debris from the inside of the appliance. Yeoman offer a filter/collection attachment for vacuum cleaners to protect them from fire ash: Ash Clean (Yeoman Part No. 2091).

—Clean the internal surfaces of the appliance using a wire brush and scraper as required. Vacuum and brush the resulting debris from the appliance.

—Clean the grate parts with a wire brush, and check the parts for any damage. Replace any damaged parts using genuine Yeoman replacements parts (see below

for details).

—Check and clean the firebricks with a wire brush. Some surface damage will occur during use. The life of

the bricks will depend on the type of fuels burnt and the level of use. Replace damaged bricks as soon as possible.

—Re-fit cleaned internal parts.

—Remove glass from door, discard all old rope seals and fit new (see Maintenance and Servicing, Section 6).

—Clean the door glass using a suitable Glass Cleaner and a soft cloth.

—Do not use cleaning agents that have a high alkaline content, for example Stovax Gel Cleaner, on appliances with painted glass. These are abrasive cleaning agents that are designed to be used with heavily stained clear glass. Use Stovax Glass Cleaner (Stovax No.4103) on more delicate surfaces.

Do not use acidic cleaners on printed glass.

—Fit new door rope seal (see Maintenance and Servicing, Section 7).

—Lightly oil the door catch mechanism and hinge pins. Avoid getting oil onto the door seals and glass.

—To refresh painted finishes use Thermolac paint.

1.2Use genuine Yeoman replacement parts to keep the appliance in safe, efficient working order. This is a list of the maintenance products that may need be required:

		Yeoman
Task	Product name	Code
		Number
Glass cleaning	Stove glass cleaner	4103
	(spray on)
Preventing build-	Protector (15 sachets)	7002
up of creosote in
	Protector (1kg tub)	7025
flue
Sealing flue pipe	Fire Cement (500g tub)	2020
joints	Fire Cement (600g cartridge)	2021
Re-painting	Thermolac Metallic Black	2053
Cleaning matt	Colloidal black (85ml)	7000
black appliances
Protecting your	Heat resistant leather gloves	4008
hands
	14mm black rope seal	5700
	(handy pack)
Door sealing rope
	14mm Black rope seal	4200H
	(25m reel)
	3mm black rope seal	4975
	(handy pack)
Glass sealing tape
	3mm black rope seal	4974
	(25m reel)
ø16mm Rope seal	16mm x 20m white	4096
Insulation tape	10mm x 2mm x 25m black	4953
	self adhesive
Thermic seal glue	(50ml bottle)	5037
Ash Clean	Vacuum cleaner attachment	2091

These products, available from your local Yeoman retailer, along with regular maintenance and use of correct fuels, will keep the appliance in the best possible condition.

1.3For more information about the Yeoman Group products please visit our web site at www.yeoman-stoves.co.uk

1.4Burn at a low temperature for the first day of use after any maintenance. This allows the seals, fixing glues and paint to fully cure.

1.5During this time the appliance may give off some unpleasant odours. Keep the room well ventilated to avoid a build-up of fumes.

1.6Your Yeoman retailer can carry out service and maintenance.

24