Diagnostic Error Code | FRU/Action | |
|
| |
1. See “Undetermined problems” on page 66. | ||
unknown | 2. | Flash the system and |
| ||
|
| (flashing) the BIOS from a disc” on page 180. |
| 3. | Replace component under function test. |
|
| |
1. AC/DC power adapter | ||
limit error | 2. | System board |
| ||
|
| |
1. Voltage Regulator Module (VRM) | ||
Module error | 2. | Microprocessor |
| ||
| 3. | System board |
|
| |
No action | ||
|
| |
1. Flash system | ||
| 2. | System board |
|
| |
Information only Restart the test, if necessary | ||
|
|
|
1. | Press F3 to review the log file. | |
exceeded | 2. | Restart the test to reset the log file. |
| ||
|
| |
1. Make sure the component that is called out is | ||
|
| connected and/or enabled. See Chapter 6 “Using the |
|
| Setup Utility program” on page 41. |
| 2. | |
| 3. | Replace the component that is called out in warning |
|
| statement. |
| 4. | Replace the component under test. |
|
| |
1. If a component is called out, make sure it is | ||
|
| connected and/or enabled . |
| 2. | Flash the system and |
|
| (flashing) the BIOS from a disc” on page 180. |
| 3. | Go to “Undetermined problems” on page 66. |
|
| |
1. See “Undetermined problems” on page 66. | ||
unknown | 2. | Flash the system and |
| ||
|
| (flashing) the BIOS from a disc” on page 180. |
| 3. | Replace component under function test. |
|
| |
1. Check fans | ||
| 2. | Check AC/DC power adapter voltages. |
| 3. | Microprocessor |
| 4. | System board |
|
| |
No action | ||
|
| |
1. Flash system | ||
| 2. | System board |
|
| |
1. Assure Asset Security Enabled | ||
| 2. | C2 Cover Switch |
| 3. | System board |
|
| |
No action | ||
|
|
|
Chapter 7.