Lenovo 5027, 384, 4168, 5067, 7516, 7519, 266, 2491 manual 025-00X-XXX 025-01X-XXX IDE interface failure

Diagnostic Error Code	FRU/Action
018-250-XXXPCI Card Services error	1. PCI card
	2.	Riser card, if installed
	3.	System board
020-000-XXXPCI Interface Test Passed	No action
020-0XX-XXXPCI Interface error	1. PCI card
	2.	Riser card, if installed
	3.	System board
020-195-XXXPCI Test aborted by user	Information only Restart the test, if necessary.
020-196-XXXPCI test halt, error threshold exceeded	1. Press F3 to review the log file.
	2.	Restart the test to reset the log file.
020-197-XXXPCI test warning	1. Make sure the component that is called out is
		connected and/or enabled. See Chapter 6 “Using the
		Setup Utility program” on page 41.
	2.	Re-run the test.
	3.	Replace the component that is called out in warning
		statement.
	4.	Replace the component under test.
020-198-XXXPCI test aborted	1. If a component is called out, make sure it is
		connected and/or enabled. See Chapter 6 “Using the
		Setup Utility program” on page 41.
	2.	Flash the system and re-test. See “Updating
		(flashing) the BIOS from a disc” on page 180.
	3.	Go to “Undetermined problems” on page 66.
020-199-XXXPCI test failed, cause unknown	1. Go to “Undetermined problems” on page 66.
	2.	Flash the system and re-test. See “Updating
		(flashing) the BIOS from a disc” on page 180.
	3.	Replace component under function test.
020-262-XXXPCI system error	1. PCI card
	2.	Riser card, if installed
	3.	System board
025-000-XXXIDE interface Test Passed	No action
025-00X-XXX 025-01X-XXX IDE interface failure	1.	IDE signal cable
	2.	Check power supply voltages
	3.	Reseat IDE signal cable
	4.	IDE device
	5.	System board
025-027-XXXIDE interface Configuration/Setup error	1. IDE signal cable
	2.	Flash the system. See “Updating (flashing) the BIOS
		from a disc” on page 180.
	3.	Reseat IDE signal cable
	4.	IDE device
	5.	System board

Chapter 7. Symptom-to-FRU index 55