Diagnostic Error Code | FRU/Action | |
|
| |
1. Run the Setup Utility program. | ||
error | 2. | Flash the system. See “Updating (flashing) the BIOS |
| ||
|
| from a disc” on page 180. |
| 3. | System board |
|
| |
1. Speakers | ||
| 2. | Microphone |
| 3. | Audio card, if installed |
| 4. | System board |
|
| |
1. Run the Setup Utility program. | ||
| 2. | Audio card, if installed |
| 3. | System board |
|
| |
Information only Restart the test, if necessary. | ||
|
|
|
1. | Press F3 to review the log file. | |
exceeded | 2. | Restart the test to reset the log file. |
| ||
|
| |
1. Make sure the component that is called out is | ||
|
| connected and/or enabled. See Chapter 6 “Using the |
|
| Setup Utility program” on page 41. |
| 2. | |
| 3. | Replace the component that is called out in warning |
|
| statement. |
| 4. | Replace the component under test. |
|
| |
1. If a component is called out, make sure it is | ||
|
| connected and/or enabled. See Chapter 6 “Using the |
|
| Setup Utility program” on page 41. |
| 2. | Flash the system and |
|
| (flashing) the BIOS from a disc” on page 180. |
| 3. | Go to “Undetermined problems” on page 66. |
|
| |
1. See “Undetermined problems” on page 66. | ||
| 2. | Flash the system and |
|
| (flashing) the BIOS from a disc” on page 180. |
| 3. | Replace component under function test. |
|
| |
1. Speakers | ||
| 2. | Audio card, if installed |
| 3. | System board |
|
| |
No action | ||
|
| |
1. Remove the game port device and | ||
|
| |
Information only Restart the test, if necessary. | ||
|
|
|
1. | Press F3 to review the log file. | |
threshold exceeded | 2. | Restart the test to reset the log file. |
| ||
|
|
|