Lenovo 2491, 384, 4168, 5067, 7516, 7519, 5027, 266 manual Diagnostic Error Code FRU/Action

Diagnostic Error Code	FRU/Action
030-196-XXXSCSI interface test halt, error threshold	1.	Press F3 to review the log file.
exceeded	2.	Restart the test to reset the log file.
030-197-XXXSCSI interface test warning	1. Make sure the component that is called out is
		connected and/or enabled. See Chapter 6 “Using the
		Setup Utility program” on page 41.
	2.	Re-run the test.
	3.	Replace the component that is called out in warning
		statement.
	4.	Replace the component under test.
030-198-XXXSCSI interface test aborted	1. If a component is called out, make sure it is
		connected and/or enabled. See Chapter 6 “Using the
		Setup Utility program” on page 41.
	2.	Flash the system and re-test. See “Updating
		(flashing) the BIOS from a disc” on page 180.
	3.	Go to “Undetermined problems” on page 66.
030-199-XXXSCSI interface test failed, cause unknown	1. Go to “Undetermined problems” on page 66.
	2.	Flash the system and re-test. See “Updating
		(flashing) the BIOS from a disc” on page 180.
	3.	Replace component under function test.
035-000-XXXRAID interface Test Passed	No action
035-0XX-XXXRAID interface Failure	1. RAID signal cable
	2.	RAID device
	3.	RAID adapter card, if installed
	4.	System board
035-195-XXXRAID interface Test aborted by user	Information only Restart the test, if necessary.
035-196-XXXRAID interface test halt, error threshold	1.	Press F3 to review the log file.
exceeded	2.	Restart the test to reset the log file.
035-197-XXXRAID interface test warning	1. Make sure the component that is called out is
		connected and/or enabled. See Chapter 6 “Using the
		Setup Utility program” on page 41.
	2.	Re-run the test.
	3.	Replace the component that is called out in warning
		statement.
	4.	Replace the component under test.
035-198-XXXRAID interface test aborted	1. If a component is called out, make sure it is
		connected and/or enabled. See Chapter 6 “Using the
		Setup Utility program” on page 41.
	2.	Flash the system and re-test. See “Updating
		(flashing) the BIOS from a disc” on page 180.
	3.	Go to “Undetermined problems” on page 66.
035-199-XXXRAID interface test failed, cause unknown	1. See “Undetermined problems” on page 66.
	2.	Flash the system and re-test. See “Updating
		(flashing) the BIOS from a disc” on page 180.
	3.	Replace component under function test.
071-000-XXXAudio port Interface Test Passed	No action

Chapter 7. Symptom-to-FRU index 57