Lenovo 266, 384, 4168, 5067, 7516, 7519 Diagnostic Error Code FRU/Action, No action, XXX Bios Timeout

Diagnostic Error Code	FRU/Action
000-000-XXXBIOS Test Passed	No action
000-002-XXX BIOS Timeout	1. Flash the system. See “Updating (flashing) the BIOS
		from a disc” on page 180.
	2.	System board
000-024-XXXBIOS Addressing test failure	1. Flash the system. See “Updating (flashing) the BIOS
		from a disc” on page 180.
	2.	System board
000-025-XXXBIOS Checksum Value error	1. Flash the system. See “Updating (flashing) the BIOS
		from a disc” on page 180.
	2.	System board
000-026-XXXFLASH data error	1. Flash the system. See “Updating (flashing) the BIOS
		from a disc” on page 180.
	2.	System board
000-027-XXXBIOS Configuration/Setup error	1. Run the Setup Utility program.
	2.	Flash the system. See “Updating (flashing) the BIOS
		from a disc” on page 180.
	3.	System board
000-034-XXXBIOS Buffer Allocation failure	1. Reboot the system.
	2.	Flash the system. See “Updating (flashing) the BIOS
		from a disc” on page 180.
	3.	Run memory test
	4.	System board
000-035-XXXBIOS Reset Condition detected	1. Flash the system. See “Updating (flashing) the BIOS
		from a disc” on page 180.
	2.	System board
000-036-XXXBIOS Register error	1. Flash the system. See “Updating (flashing) the BIOS
		from a disc” on page 180.
	2.	System board
000-038-XXXBIOS Extension failure	1. Flash the system. See “Updating (flashing) the BIOS
		from a disc” on page 180.
	2.	Adapter card
	3.	System board
000-039-XXXBIOS DMI data error	1. Flash the system. See “Updating (flashing) the BIOS
		from a disc” on page 180.
	2.	System board
000-195-XXXBIOS Test aborted by user	Information only Restart the test, if necessary.
000-196-XXXBIOS test halt, error threshold exceeded	1. Press F3 to review the log file.
	2.	Restart the test to reset the log file.
000-197-XXXBIOS test warning	1. Make sure the component that is called out is
		connected and/or enabled. See Chapter 6 “Using the
		Setup Utility program” on page 41.
	2.	Re-run test.
	3.	Replace the component that is called out in warning
		statement.
	4.	Replace the component under test.

48ThinkCentre Hardware Maintenance Manual