Lenovo 266, 384, 4168, 5067, 7516, 7519, 5027, 2491 manual 030-00X-XXX 030-01X-XXX Scsi interface failure

Diagnostic Error Code	FRU/Action
025-02X-XXX 025-03X-XXX 025-04X-XXX IDE Interface	1. IDE signal cable
failure	2.	Check AC/DC power adapter
	3.	Reseat IDE signal cable
	4.	IDE device
	5.	System board
025-195-XXXIDE interface Test aborted by user	Information only Restart the test, if necessary.
025-196-XXXIDE interface test halt, error threshold	1.	Press F3 to review the log file.
exceeded	2.	Restart the test to reset the log file.
025-197-XXXIDE interface test warning	1. Make sure the component that is called out is
		connected and/or enabled. See Chapter 6 “Using the
		Setup Utility program” on page 41.
	2.	Re-run the test.
	3.	Replace the component that is called out in warning
		statement.
	4.	Replace the component under test.
025-198-XXXIDE interface test aborted	1. If a component is called out, make sure it is
		connected and/or enabled. See Chapter 6 “Using the
		Setup Utility program” on page 41.
	2.	Flash the system and re-test. See “Updating
		(flashing) the BIOS from a disc” on page 180.
	3.	Go to “Undetermined problems” on page 66.
025-199-XXXIDE interface test failed, cause unknown	1. Go to “Undetermined problems” on page 66.
	2.	Flash the system and re-test. See “Updating
		(flashing) the BIOS from a disc” on page 180.
	3.	Replace component under function test.
030-000-XXXSCSI interface Test Passed	No action
030-00X-XXX 030-01X-XXX SCSI interface failure	1. SCSI signal cable
	2.	Check AC/DC power adapter
	3.	SCSI device
	4.	SCSI adapter card, if installed
	5.	System board
030-027-XXXSCSI interface Configuration/Setup error	1. SCSI signal cable
	2.	Flash the system. See “Updating (flashing) the BIOS
		from a disc” on page 180.
	3.	SCSI device
	4.	SCSI adapter card, if installed
	5.	System board
030-03X-XXX 030-04X-XXX SCSI interface error	1. SCSI signal cable
	2.	Check AC/DC power adapter
	3.	SCSI device
	4.	SCSI adapter card, if installed
	5.	System board
030-195-XXXSCSI interface Test aborted by user	Information only Restart the test, if necessary.

56ThinkCentre Hardware Maintenance Manual