Dell E4310 Option Description Integrated NIC, Parallel Port, Serial Port, Sata Operation

Option	Description
Integrated NIC	Allows you to configure the integrated network controller. The options are: Disabled, Enabled, and Enabled w/PXE
	Default Setting: Enabled w/PXE
Parallel Port	Allows you to configure the parallel port on the docking station. The options are: Disabled, AT, PS2, and ECP
	Default Setting: AT
Serial Port	Allows you to configure the integrated serial port. The options are: Disabled, COM1, COM2, COM3, and COM4
	Default Setting: COM1
	Allows you to configure the internal SATA hard-drive controller. The options are: Disabled, ATA, AHCI, and RAID On
SATA Operation	Default Setting: RAID On
	NOTE: SATA is configured to support RAID mode.
	Allows you to enable or disable the following devices:
	•	External USB Port
	•	Microphone
	•	eSATA Ports
	•	Media Card
Miscellaneous Devices	•	Internal Modem
	•	Fixed Bay
	•	ExpressCard
	•	Hard Drive Free Fall Protection
	•	Camera and Microphone
	Default setting: All are enabled.
Latitude ON Reader	Allows you to configure the operating mode of the Latitude ON Reader.
	Default Setting: Enable Latitude ON reader
Keyboard Illumination	Allows you to configure the keyboard illumination feature. The options are: Disabled, Auto ALS and Input, and Auto
	Input Only
Video
Option	Description
Ambient Light Sensor	Allows you to configure the Ambient Light Sensor.
	Default Setting: Disabled
LCD Brightness	Allows you to set the display brightness depending up on the power source (On Battery and On AC).
Security
Option	Description
	Allows you to set, change, or delete the administrator (admin) password.
Admin Password	NOTE: You must set the admin password before you set the system or hard drive password.
	NOTE: Successful password changes take effect immediately.
	NOTE: Deleting the admin password automatically deletes the system password as well.
	Default Setting: Not Set
	Allows you to set, change, or delete the system password. When set, your computer requests you to enter the system
System Password	password every time your computer turns on or restarts.
	Default Setting: Not Set
	Allows you set, change, or delete the password on the system's internal hard disk drive (HDD). Successful changes
Internal HDD Password	take place immediately and require a system restart. The HDD password travels with the hard drive, so the HDD is
	protected even when installed in another system.
	Allows you to bypass the system and internal hard drive password prompts when your computer restarts or resumes
	from standby.
	You can set Password Bypass to: Disabled and Reboot Bypass.
Password Bypass
	NOTE: You cannot bypass the system or hard drive password when you turn on your computer that has been
	turned off.
	Default Setting: Disabled
	Allows you to enable of disable changes to the system and hard drive passwords when the admin password is set.
Password Change
	Default Setting: Allow Non-Admin Password Changes checked
	Allows you to enable of disable the option to enforce strong passwords.
	If enabled, all passwords set on the computer must contain at least one uppercase character, one lowercase character
Strong Password	and be at least 8 characters long.
	Enabling this feature automatically changes the default minimum password length to 8 characters.
	Default Setting: Disabled
	Allows you to enable or disable the Trusted Platform Module (TPM) on the computer.
	NOTE: Disabling this option does not change any settings you may have made to the TPM, or delete any information or
	keys you may have stored there.
TPM Security	When TPM is enabled, the following options are available: