4
REGISTERING | HOW TO USE |
To use the Magic Remote Control, pair it with your TV first.
How to register the Magic
Remote Control
1 Put batteries into the Magic Remote Control and turn the TV on.
2 Point the Magic Remote Control at your TV and press the WHEEL (OK) on the remote control.
*If the TV fails to register the Magic Remote Control, try again after turning the TV off and back on.
How to Re-register the Magic
Remote Control
Press the BACK
and SMART
at the same time, for five seconds, to unpair the Magic Remote Control
with your TV.
If you wish to
press the WHEEL (OK) on the remote VPDUW control.
* Shake the Magic Remote Control slightly to the right and left or press SMART
, 
, /Q.MENU buttons to make the pointer appear on the screen.
* Shake the Magic Remote Control slightly to the right and left to make the pointer appear on the center of screen.
* If the pointer has not been used for a certain period of time, it will disappear.
* The wheel also functions as the ‘OK’ button when pressed.
* You can change channels and scroll through menus using the Wheel.
* You can just move your wrist to move the pointer instead of moving your whole arm.
* The Magic Remote Control depletes batteries faster than a normal remote due to the additional features. You may wish to use rechargeable batteries.
* If the pointer loses its calibration, set down the remote for a couple of minutes to let it recalibrate.
