LG Electronics AN-MR400 Installing The Rf Dongle, Rf Specification, Precautions To Take

Models: AN-MR400

1 5
Download 5 pages 54.89 Kb
Page 3
Image 3
RF DONGLE

RF DONGLE

LA97**/ LA96**/ LA88**/ LA86**/ LA79**/ LA74**/ LA71**/ LA69**/ LA68**/ LA66**(LA6600 Except for Korea) / LA64**(Japan, Asia, Austrailia, Middle East, Africa)

/LA6250(Korea) / LA6205(Brazil, Mexico, USA, Canada) / LA620*(Japan, Asia, Austrailia , Middle East, Africa) / LN6100(Middle East, Africa) / LN5750(Brazil, Mexico, USA, Canada), LN570*(Korea, Except for 32LN570*)/ LN570*(Middle East, Africa)/ LN578*(Europe)/ PH67**/ PH66** / PH47** models do not require RF dongle connection. RF Dongle is built in TV.

Cable IN

REV.5

Lamp

INSTALLING THE RF DONGLE

Image shown may differ from your TV.

1Locate the designated Velcro attachment location on the TV. Then tear off the protection paper and attach the Velcro. (The attachment

location is different depending on the TV model you own)

2Connect the RF Dongle Cable plug on the RF Dongle to a USB or USB Apps jack on the TV.

Velcro

86%

 

*Attach the RF Dongle aligning with the upper left corner bracket.

3 Attach the RF Dongle to the velcro as shown above and then turn on the TV.

4 Turn your TV on and wait 20 seconds. Now, register the Magic Remote Control with your TV.

*If the RF Dongle for the wireless media box is attached, attach the RF Dongle for the Magic Remote Control on the below right of the back of the TV.

3

*To avoid wireless interference, keep the distance between the Wi-Fi dongle and the remote RF dongle over 20 cm.

20 cm

RF SPECIFICATION

The Magic Remote Control communicates with the RF Dongle using Bluetooth Version 3.0 .

Output Power (Max.) : 10 dBm or lower

Maximum Communication Distance : Line of Open Sight approx. 10 m

Frequency Range :

2.400 GHz - 2.4835 GHz

Data Rate (Max.) : 3 Mbps

PRECAUTIONS TO TAKE

Use the remote control within the specified range (within 10 m).

You may experience communication failures when using the device outside the coverage area or if there are obstacles within the coverage area.

You may experience communication failures depending on the accessories.

Devices such as a microwave oven and wireless LAN operate in the same frequency band (2.4 GHz) as the Magic Remote Control. This may cause communication failures.

The Magic Remote Control may not work properly if a wireless router (AP) is within 1 meter of the TV. Your wireless router should be more than 1 m away from the TV.

Do not disassemble or heat the battery.

Do not drop the battery. Avoid avoid extreme shocks to the battery.

Inserting the battery the wrong way may result in explosion.

Page 3
Image 3
LG Electronics AN-MR400 owner manual Installing The Rf Dongle, Rf Specification, Precautions To Take