Kyocera FS-C5016N manual Dimension 216 mm, 21 6 mm, Entering the Width and Length

3.10 Paper Handling

Entering the Width and Length

Then, use the following procedure to set the paper size.

Enter the paper size for X Dimension and Y Dimension as shown in the figure.

148 to 216 mm

(5.83 to 8.5 inches)

X DimensionYDimension 210 to 356 mm (8.27 to 14.02 inches)

Figure 3-14

1	When the unit of measurement is set, press the V key.
	>>X Dimension appears as shown below (the paper width setting).

>>X Dimension 216 mm

2 Press the ENTER key. A blinking cursor (_) appears.

>>X Dimension

216 mm

3	Press the U or V key to increase or decrease the value of the figure where the cursor
	is blinking and display the desired width. The width can be set between 148 and

216 mm (5.83 to 8.5 inches). You can use the Y or Z key to move the cursor right and left.

4

5

6

7

8

Display the paper width and press the ENTER key.

When the width is set, press the key. >>Y Dimension appears (the paper length setting). Set the desired length in the same way as the width. The length can be set between 210 and 356 mm (8.27 to 14.02 inches).

Display the paper length, press the ENTER key.

Press the MENU key. The display returns to Ready.

To print using the custom size set above, define the same custom size on the printer driver. For details, see KX Printer Drivers Operation Guide.

3-75