Kyocera FS-C5016N Deleting Data, Partition Type, Partition Name, Write Partition Length, Others

3.9 Operating the Storage Device

The file is written onto the memory card given a destination name (also referred to as a partition name) which the printer automatically assigns one after another as follows: DataS001 (first data), DataS002 (second data), DataS003 (third data)...

FS-C5016N Page Printer

WRITE INFORMATION

	Figure 3-10
	Partition Type:	Type of data written (currently only type 2 is supported).
	Partition Name:	The destination name of data written to the card.
	Write Partition Length:	The size of the written data on the memory card.
	Others:	Error information.
	When the memory card write information page is printed, the display returns to
	Ready.
9	Repeat above steps until you have transferred all data (files) that you want to write to
	the memory card. Each time you finish writing data, a memory card write

information page is printed from the printer showing the information, but pertaining only to the data just written. To see all data contained in the memory card at once, print a list of data names as explained. See Printing a List of Data Names (Partitions) on page 3-64.

Deleting Data

It is possible to use the printer to delete data from a memory card one by one.

To delete data from a memory card, proceed as follows. Check that the memory card contains data. Otherwise, the >Delete Data menu will not appear on the message display.

1

2

Press the MENU key.

Press the U or V key repeatedly until Memory Card > appears.

Memory Card >

3 Press the Z key.

3-62