Manuals / Kyocera / Computer Equipment / Printer

Kyocera FS-C5016N manual For More Information, Guide to the Operation Guide, Description

Models: FS-C5016N

1 218

Download 218 pages 20.11 Kb

Page 15

For More Information...

Item	Description
Installation Guide	Describes the printer setup procedure.
(paper manual)

Quick Reference Guide	Describes common information about the printer such as load-
(paper manual)	ing paper, understanding messages, etc.

The following documents are stored in the CD-ROM as PDF documents.

Operation Guide (this manual)	Guides you through topics concerning the operations and main-
	tenance of the printer.

KX Printer Drivers Operation Guide	Describes how to install and set the printer driver.

PRESCRIBE Command Technical	PRESCRIBE is the native language of the Kyocera Mita
Reference	printers. This Technical Reference contains the information
	about how the printing is performed using the PRESCRIBE
	commands as well as the font and emulation description. Also
	included is a list of permanent parameters and their explanation
	needed when customizing your printer.

PRESCRIBE Command Reference	Gives a detailed explanation of the PRESCRIBE command
	syntax and parameters with the aid of print examples.

Guide to the Operation Guide

This Operation Guide has the following chapters:

Chapter 1 Introduction

This chapter explains printer features and the names of parts.

Chapter 2 Handling Paper

This chapter explains the types of paper that can be used with the printer.

Chapter 3 Using the Operator Panel

This chapter explains the message display, indicators and keys on the operator panel, and how to make various settings from the operator panel.

Chapter 4 Troubleshooting

This chapter explains how to handle printer problems that may occur, such as paper jams.

Chapter 5 Maintenance

This chapter explains how to replace the toner container and how to care for your printer.

Appendix A Options

This appendix introduces the available options to be used with the printer.

Appendix B Computer Interface

This appendix explains the pin assignment and specifications for the printer’s parallel interface, USB interface, and serial interface.

Appendix C Technical Specifications

This appendix lists the printer’s specifications.

xiv

Image 15

Kyocera FS-C5016N For More Information, Guide to the Operation Guide, This Operation Guide has the following chapters

Contents

FS-C5016N Symbols Regarding Tradenames Iii Agfa Monotype License Agreement FCC statement for users in the United States Important Notes for Interface connectors Vii Viii Group for Energy Efficient Appliances Geea Other Precautions Installation PrecautionsPower Supply/Grounding the Printer Precautions for Use Xiii This Operation Guide has the following chapters This appendix lists the printer’s specificationsFor More Information Guide to the Operation GuideContents Paper Handling Setting Print QualityPagination Operating the Storage DeviceIndex Introduction Features GeneralHardware Software Built-in and external network interfaces NetworkingKPDL3 Kyocera Printer Description Language Account Management SystemFront Parts and FunctionsThis switch turns printer power on and off LeftThis tray receives printouts face down Internal Air is purged through these vents to cool down the inside RearHandling Paper Values Paper specificationsGeneral Available paper typesSize Product Weight Minimum and Maximum Paper SizesRecommended Paper Paper composition Selecting the Right PaperGuidelines Paper conditionsPaper properties Basis weightsPaper Weight Equivalence Table Bond Weight lb Europe Metric Weight g/m²Moisture content Thickness CaliperGrain Other properties of paper Loading Paper into the Cassette Loading PaperPush the bottom plate down until it locks Size Paper size windowSlide the paper into the paper cassette Load Limit Level of empty LTR B5 A5 Loading Paper into the MP Multi-Purpose TrayCollect Incollect Special Paper Selecting the Special PaperPaper type to be used Paper type to be selected Adhesive-backed labels TransparencyValue PostcardsThick Paper EnvelopesColored paper Pre-printed paperRecycled paper Paper Type Using the Operator Panel Message Meaning Understanding the Operator PanelMessage Display Status InformationReady Indicators in Message DisplayError codes Interface Indicator InterfacePaper Size Indicator Size Paper Type Indicator Type READY, DATA, and Attention IndicatorsIndicator Description Cancel Key KeysGO Key Ready display Menu KeyArrow Keys Enter KeyUsing the Menu Selection System Entering the Mode Selection MenuMenu Selection System Type Adjust Paper Weight NormalPaper Handling Menu System Road Map Menu KeyOn the next USB Font Set Print Quality Inch Dimension 216 mm Feed Select Cassette Duplex Mode None Buzzer BuzzerOn Print Menu Map ? Menu Map and Status PagesPrinting a Menu Map Print Menu MapMenu MAP Prints a status Printing a StatusPrint Status Print Status Page ?Understanding the Status Software VersionHardware Information Information Installed OptionsError Log MemoryMPS Job RetentionQuick Copy Proof-and-Hold Private Print Virtual mailbox can be used in PCL 6 emulation only Using Quick CopyJob Storage Virtual MailboxQuick Copy ?Arlen MPSQuick Copy Harold Quick Copy ?HaroldDeleting a Quick Copy Job Using Proof-and-HoldReport Copies Report DeletePrivate/Stored ?Arlen Printing a Private Print/Stored JobPrivate/Stored Harold Private/Stored ?HaroldDeleting a Private/Stored Job Agenda 0000Agenda Copies Agenda DeleteJob Manager Printing a Code JobList of Code JOB List of Code JOB ?Printing a List of Code Jobs Print VMB Data Tray001?Richard Retrieving Jobs from Virtual Mailbox VMBPrint VMB Data Tray001 Print VMB Data Tray001RichardVirtual mailboxes as shown in -6below List of VMBList of VMB ? Press the U or V key repeatedly until List of VMB appearsPress the Enter key. a blinking cursor appears Changing e-MPS ConfigurationMPS Configuration Quick CopyAppears Temp. Code JOB Size 1550MBPress the Menu key. The display returns to Ready Maximum Space Assigned to Temporary Code JobsMaximum Space Assigned to Permanent Code Jobs Perm. Code JOB Size 1550MBBlinking cursor VMB Size 1550MBMaximum Space Assigned to Virtual Mailboxes VMB Press the Z key Press the U or V key and select VMB SizeInterface ? Parallel Changing Parallel Interface ModeChanging the Interface Parameters Interface ? SerialPress the U or V key repeatedly until Serial appears Changing Serial Interface ParametersParallel I/F ? Nibble high Mark ? appearsRange Baud Rate ?Changing Network Interface Parameters Interface ? NetworkPress the Enter key again EtherTalk Off Network Status Page Off NetWareResolving IP Address Off IP Address 000.000.000.000 Subnet Mask GatewayIP Address 000.000.000.00 Status ? On Interface ParallelNetwork Status Off Status ? OffNetwork Status Making Default Settings Default EmulationEmulation ?PCL Key Alternative Emulation for Kpdl EmulationEmulation Alt. Emulation ?PCLPrint Kpdl Errs Off Printing Kpdl ErrorsSelect Kpdl or Kpdl Auto using the U or V key Emulation ?KPDL?I000 Default FontFont Font Select InternalCourier Regular Selecting Regular or Dark Courier/Letter GothicMake sure that Internal is displayed and press the Z key Size Points Changing the Default Font SizePitch 10.00 cpi Pitch 10.0 CpiCharacter Pitch for Courier/Letter Gothic Setting the Code Set Code Set IBM PC-8Code Set ?IBM PC-8 Fonts are shown in -8on the next List of Internal FontsList of Internal Fonts? Printing Lists of FontsPrescribe Copies 001 PaginationNumber of Copies SetPrint Orientation Orientation PortraitOrientation ? Portrait Protect ? Auto Protect ModeProtect Protect ? OnLinefeed LF Action LF Action LF onlyLF Action ? LF only Carriage-Return CR Action CR Action CR onlyCR Action ? CR only Wide A4 Pitch Wide A4 OffWide A4 ? Off Gloss Mode ? Low Setting Print QualityGloss Mode Gloss Mode LowRead Fonts Using the Memory CardOperating the Storage Device Memory CardRead Data ?Report Memory card starts. When completed, Processing disappearsRead Fonts Processing Read Data ReportMemory card write information page as shown below Write DataWrite Data ? Writing DataWrite Partition Length Deleting DataPartition Type Partition NameFormat ? Delete Data ReportDelete Data ?Report FormatPrinting a List of Data Names Partitions List of PartitionsStarts Format information page includes the following itemsPartition Size List of Partitions ?Printout example above includes the following information Device Name/NumberUsing the RAM Disk Using the Optional Hard DiskRAM Disk Size MByte RAM Disk Mode OffRAM Disk Mode ? On Setting the RAM Disk SizePaper Handling MP Tray ModeMP Tray Mode Cassette MP Tray Mode ? CassetteMP Tray Size A4 Setting MP Tray Paper SizeFor the MP tray Through the following paper sizesThrough the following paper types Setting the MP Tray Paper TypeMP Tray Type Plain MP Tray Type ? PlainCustom Paper Size Setting the Cassette Paper SizeCassette Size ? Custom Setting Paper Size DialSetting a custom size from the Operator Panel Cassette Size CustomSelecting the Unit of Measurement Unit mmUnit ? mm For the paper cassette21 6 mm Dimension 216 mmDimension When the unit of measurement is set, press the V keySetting the Cassette Paper Type Cassette Type PlainCassette Type ? Plain Selecting the Paper Feed Source Feed Select CassetteFeed Select ? Cassette Jam may occur Duplex PrintingBinding Modes PrinterMode is set Duplex Mode NoneDuplex Mode ?None None defaultOverriding Difference between A4 and Letter Override A4/LT OffOverride A4/LT ? Off Shown below Type Adjust CustomType Adjust ? Custom Creating Custom Paper Type3-81 and press the Z key Paper Weight ? NormalSetting the Paper Weight Press the U or V key repeatedly until Paper Weight appearsPress the U or V key repeatedly until Duplex path appears Duplex path EnableDuplex path ? Enable Setting the Duplex PathDisplay returns to Ready Resetting the Custom Paper TypeReset Type Adjust Reset Type Adjust ?Selecting the Output Stack Stack Select Face-down trayStack Select ? Face-down tray Color Mode Color Mode ? ColorSelecting Monochrome or Color Printing Total Print Reading Life CountersDisplaying the Total Printed Pages Life CountersNew Toner C Installed ? Resetting the Toner CounterMSG Language English Other ModesSelecting the Message Language OthersAutomatic Form Feed Timeout Setting Form Feed Time Out 030secFollowing order Sleep Mode ? On Setting the Sleep TimerSleep Timer 015 min Sleep ModeSleep Timer Timeout Time Sleep Timer 015minProcessing Waiting Received Data DumpPrint HEX-DUMP Print HEX-DUMP?Self test Please wait Ready Printer ResettingPrinter Reset Printer Reset ?Temporary for resource protection Resource ProtectionResouce Prot Off Resouce Prot ? OffAlarm Buzzer Setting Buzzer OnBuzzer ? On Auto Continue Setting Auto Continue Mode OffAuto Continue Mode ? Off Setting the Auto Continue Recovery Time Auto Continue Mode OnAuto Continue Timer 030sec Duplex ? Off Duplex Printing Error Detection SettingFinishing Error Duplex OffColor Registration Print Regist ChartPrint Regist Chart ? Color RegistrationAdjust Cyan L= H= R= Adjust CyanFlash under the left L value Adjust Cyan =-2 H= 00 R= =-2 H= 00 R=+1Press the U or V key until that value is displayed Service Printing the Service StatusPlease wait Calibrating Color CalibrationColor Calibration Color Calibration ?Troubleshooting Symptom Check Items Corrective Action General GuidelinesTips Dropouts, horizontal streaks, stray dots Print Quality ProblemsPrinted Results Corrective Action Completely blank printout Full single-color printoutType on Faint or blurred printingDirt on the top edge or back of the paper Printed Results Corrective Action Grey backgroundSkewed-color printout Message Corrective Action Error MessagesUsing the Operator Panel, section Formatting a Memory Card Selecting the Paper Feed Source on Paper size from the MP tray can cause paper jam Code Meaning Storage Error Codes Hard Disk ErrorsMemory Card Errors RAM Disk ErrorsClearing Paper Jams Possible Paper Jam LocationsPaper jam message Description Reference Location Utilizing Online Help Messages General considerations for clearing jamsJam at the Paper Cassette Jam at the Paper Transfer Unit UnitPush the paper transfer unit back Jam at the Rear Cover Jam at the MP Tray Jam at the Optional Envelope FeederJam at the Optional Duplexer Maintenance Toner Kits Toner Container ReplacementFrequency of toner container replacement Starter Toner ContainersToner Container Replacement Replacing the Toner Container Carefully remove the old toner container from the printer Toner Container Replacement As far as it will go Replacing the Waste Toner Box Open the cap of the new waste toner box Regulations for waste disposalCorrectly, it will snap into place Cleaning the Main Charger Unit Cleaning the PrinterLeft Cover Figure below Grid cleaner out of the protective bag and remove the capCharger unit to its home position Reused This may adversely affect print quality Cleaning the Paper Transfer UnitWiper cloth included in the toner kit Push the paper transfer unit back in completelyPush it back in. Repeat this 2 times Cleaning the Advanced Beam Array LensesCorresponding color will be printed over the whole Lens cleaner knob to its home positionAppendix a Options Figure A-1 OptionsFigure A-2 Expansion Memory ModulesPull out the main controller board gently Installing the Memory ModulesFigure A-6 Memory socket until it clicks in placeRemoving a Memory Module Testing the expanded memoryInsert the memory card in the memory card slot General Description of OptionsMemory Card Reading Font from the Memory Card3 DU-300 Duplex Unit 2 PF-60 Paper Feeder4 PT-300 Face-up Output Tray Install the face-up output tray on the rear of the printerFigure A-13 Hard DiskNetwork interface card Network connections 6 IB-20/IB-21E/IB-22 Network Interface CardsAppendix B Computer Interface You can choose from four communication modes Communication Reception Transmission ModeParallel Interface Communication ModesPin Signal Description Out Interface SignalsGround return NInit Ignored USB Interface SpecificationsPin Or out Signal Description Serial Interface OptionInterface voltage levels H2 Number of data bits RS-232C ProtocolParameters of the RS-232C Protocol H1 Baud ratePrescribe Frpo D0 Command Connecting the Printer to the Computer RS-232C Cable ConnectionPreparing an RS-232C Cable Double click on Communications Port After setting the properties, click the OK button To test the interface, enter the following DOS, enter the following commandsAppendix C Technical Specifications Specification Printer SpecificationInches deep Printing Speeds Mode Paper Size Print Speeds color/monochromeIndex KPDL3 Prescribe Index-4 Kyocera Mita Corporation