Kyocera FS-C5016N Unit mm, Unit ? mm, For the paper cassette, Selecting the Unit of Measurement

3.10 Paper Handling

6	Press the U or V key to display the desired paper size. The message display toggles
	through the following paper sizes:
	Custom
	Oficio II
	Folio
	16K
	C5
	A5
	B5
	ISO B5
	A4
	Executive
	Letter
7	When the desired paper size is displayed, press the ENTER key. The paper size is set
	for the paper cassette.

If you selected Custom in step 6, be sure to set the unit of measurement and the dimensions of the paper as described in the following sections.

Selecting the Unit of Measurement

Then, use the following procedure to set the unit of measurement.

1

2

Press the Z key.

Press the U or V key repeatedly until >>Unit appears. The unit of measurement can be selected between millimeters and inches. The current unit of measurement is displayed (the default setting is mm).

>>Unit mm

3 Press the ENTER key. A blinking question mark (?) appears.

>>Unit ? mm

4

5

Select mm or inch using the U or V key.

Press the ENTER key.

Set the dimensions of the paper as described in the next section.

3-74