Kyocera FS-C5016N manual Sleep Timer 015min, Sleep Timer Timeout Time

3.13 Other Modes

Sleep Timer Timeout Time

You can adjust the timer timeout time, the length of time the printer waits before entering sleeping mode in the absence of data. The default sleep timer timeout time is 15 minutes.

The printer reverts to normal operation mode when the printer receives a print job, the operator panel is operated, or one of the exterior covers is opened.

Color calibration is automatically executed before the printer reverts to normal operation mode.

Note

To confirm and change the timeout time, proceed as follows:

1

2

3

4

Press the MENU key.

Press the U or V key repeatedly until Others > appears.

Others >

Press the Z key.

Press the U or V key repeatedly until >Sleep Timer > appears.

>Sleep Timer > 015min.

5	To change the timeout time, press the ENTER key. A blinking cursor (_) appears.
		>Sleep Timer
		015min.
6	Press the U or V key to increase or decrease the value at the blinking cursor and set
	the desired time. The timer can be set between 5 and 240 min, in 5-minute

increments. Use the Z and Y keys to move the cursor right and left.

7

8

When the desired timeout time is displayed, press the ENTER key.

To exit the menu selection, press the MENU key.

3-92