Kyocera FS-C5016N manual Hard Disk, Figure A-13

A.3 General Description of Options

A.3.5 Hard Disk

The hard disk is used for saving print data. This is advantageous when printing multiple sets of copies, as high-speed printing is possible using the electronic sorting function. The hard disk is further required in order to use the e-MPS function. You can use the KM-NET Printer Disk Manager utility to keep track of the stored data. This software is included in the CD-ROM supplied with the printer.

The hard disk must be installed in the option interface slot that is located at the back of the printer as shown below.

The hard disk must be formatted before the initial use. To format the hard disk, use the printer operator panel or the KM-NET Printer Disk Manager. Before you install the hard disk in the printer, power off the printer and unplug the power cord.

Option Interface

Slot

Figure A-13

A-10