Kyocera FS-C5016N manual Auto Continue Setting, Auto Continue Mode Off, Auto Continue Mode ? Off

3.13 Other Modes

3.13.8Auto Continue Setting

If an error that still allows you to continue printing occurs (Memory overflow Press GO, Print overrun Press GO, KPDL error Press GO, File not found Press GO, RAM disk error Press GO, MemoryCard err Press GO, Hard disk err Press GO, and Duplex disabled Press GO), the next received data is automatically printed after a set period of time elapses. For example, if the printer is shared over a network as a network printer and one person causes one of the above errors, after the set period of time elapses, the data sent from the next person is printed. The default setting is Off (Auto Continue disabled).

For setting the auto continue recovery time, see the next section.

Note

1

2

3

4

Press the MENU key.

Press the U or V key repeatedly until Others > appears.

Others >

Press the Z key

Press the U or V key repeatedly until Auto Continue > appears.

>Auto Continue >

Mode Off

5 Press the ENTER key. A blinking question mark (?) appears.

>Auto Continue

Mode ?Off

6

7

8

Select On or Off using the U or V key.

Press the ENTER key.

To exit the menu selection, press the MENU key. The display returns to Ready.

3-97