Kyocera FS-C5016N manual Selecting the Paper Feed Source on

			4.3 Error Messages
Message			Corrective Action
			The paper cassette matching the paper size and paper type of the print job is
Load Cassette #
( ) (	)†		empty. Load paper into the paper cassette as displayed in place of #. Press
A4 / PLAIN			the GO key to resume printing.
			If you want to print from a different paper source, press the U or V key to
			display Use alternative and you can change the source for paper
			feeding. After selecting a paper source and pressing the MENU key, Paper
			Handling > appears. By pressing the Ukey, the paper type settings menu
			appears. After setting the correct paper type, press the ENTER key and
			printing starts. For details, see Chapter 3 Using the Operator Panel, section
			3.10.6 Selecting the Paper Feed Source on page 3-77.
			There is no paper cassette installed in the printer that matches the paper size
Load EF
		†	and paper type of the print job. Set paper in the envelope feeder. Press the
(A5)/(PLAIN)
			GO key to resume printing. (Note that feeding the paper having a paper size
			which does not match the current paper size from the envelope feeder can
			cause paper jam.)
			If you want to print from a different paper source, press the U or V key to
			display Use alternative and you can change the source for paper feed-
			ing. After selecting a paper source and pressing the MENU key, Paper
			Handling > appears. By pressing the Ukey, the paper type settings menu
			appears. After setting the correct paper type, press the ENTER key and
			printing starts. For details, see Chapter 3 Using the Operator Panel, section
			3.10.6 Selecting the Paper Feed Source on page 3-77.
			There is no paper cassette installed in the printer that matches the paper size
Load MP Tray
(A4)/(PLAIN)†			and paper type of the print job. Set paper in the MP tray. Press the GO key
			to resume printing. (Note that feeding the paper having a paper size which
			does not match the current paper size from the MP tray can cause paper jam.)
			If you want to print from a different paper source, press the U or V key to
			display Use alternative and you can change the source for paper
			feeding. After selecting a paper source and pressing the MENU key, Paper
			Handling > appears. By pressing the Ukey, the paper type settings menu
			appears. After setting the correct paper type, press the ENTER key and
			printing starts. For details, see Chapter 3 Using the Operator Panel, section
			3.10.6 Selecting the Paper Feed Source on page 3-77.
			The memory card is accidentally removed from the printer’s memory card
Memory card err
			slot during reading. If you continue reading the memory card, insert the
Insert again
			same memory card into the slot again. The printer again reads it from the
			beginning of the data.
			Also see Insert the same memory card.
			The total amount of data received by the printer exceeds the printer’s inter-
Memory overflow
			nal memory. Try adding more memory. Press the GO key to resume print-
Press GO
			ing. You can abandon printing by the CANCEL key.
			If Auto Continue is set to On, printing will be automatically resumed after a
			preset period of time. For details on Auto Continue, refer to Chapter 3 Using
			the Operator Panel, section 3.13.8 Auto Continue Setting on page 3-97
			A memory card error has occurred. Look at the error code given in place of
MemoryCard err##
Press GO			## and refer to Storage Error Codes on page 4-11. To ignore the memory
			card error, press the GO key

Missing duplex drawer

The duplex drawer is either not installed or incorrectly inserted. Insert the duplex drawer securely.

Paper jam

###############

A paper jam has occurred. The location of the paper jam is indicated in place of the #’s. For details, see Section 4.4 Clearing Paper Jams on page 4-12.

Table 4-3 (Continued)

4-9