Pioneer CMX-5000 manual Error message display, Cleaning the jog dial, English Français

Appendix

Troubleshooting

Error message display

When the CMX-5000 CD player is unable to operate properly, an error code is displayed on the display panel. Check the error code displayed against the following table and take the recommended action to correct the error. If an error code other than any of the error codes listed in the table below is displayed or if the same error code is displayed even after corrective action has been taken, contact your nearest Pioneer Service Station or contact the store from which you purchased your player for assistance.

Error Code	Error Type	Description	Possible cause and recommended action
E-7201	TOC READ ERROR	Player unable to read TOC data after	Disc is cracked.
		interval of 20 seconds.	= Recommended action: replace disc.
E-83 01	PLAYER ERROR	Player unable to play back currently	Disc is soiled or dirty.
E-83 02		inserted disc.	= Recommended action: clean disc.
E-83 03
E-83 04
E-91 01	MECHANICAL TIME OUT	Mechanical operation has failed to	Dust or some other form of foreign particles have
			found their way into disc insertion slot.
		complete within specified time interval.
			= Recommended action: remove dust or other
			foreign particles.

English

Français

Cleaning the jog dial

To clean the PLAYER wipe with a polishing or a soft, dry cloth. For stubborn dirt, moisten a soft cloth with a weak solution of neutral detergent (diluted in five to six parts water), wring the cloth well, and wipe away the dirt. Use a dry cloth to wipe the surface dry. Applying alcohol, paint thinner, benzene, insecticides, or other stringent substances to the jog dial may cause the markings or finishing of the dial to peel or become discolored, and the use of any such substances should accordingly be avoided.

<DRB1255> 31 En/Fr