Kyocera FS-C5016N manual Write Data ?, Writing Data

3.9 Operating the Storage Device

Writing Data

Data can be written to a memory card until no space is left for storing. When writing to a memory card, a name is assigned to the file automatically. You can use the procedure explained in the section Printing a List of Data Names (Partitions) on page 3-64to print a list of data names for confirmation.

To write data to a memory card, proceed as follows.

First check that the memory card is properly formatted. Otherwise, the >Write Data message to be explained below will not be shown on the message display. If the memory card inserted in the memory card slot is not

Note	formatted, the >Format will automatically appear on the message display.
	Format the memory card. See Formatting a Memory Card on page 3-63.

1

2

3

4

5

6

7

Press the MENU key.

Press the U or V key repeatedly until Memory Card > appears.

Memory Card >

Press the Z key.

Press the U or V key repeatedly until >Write Data appears.

>Write Data

Press the ENTER key. A question mark (?) appears.

>Write Data ?

Press the ENTER key. Processing appears, then Waiting.

In this state, send the file from the computer to the printer.

As the printer receives data, the message display changes to Processing, then when the end of the data is received, the message display changes to Waiting.

8	Check that the message display has changed to Waiting, then press the GO key. This
	writes the file to the memory card and instructs the printer to automatically print out

a memory card write information page as shown below.

3-61