Kyocera FS-C5016N manual Creating Custom Paper Type, Type Adjust Custom, Type Adjust ? Custom

3.10 Paper Handling

3.10.9Creating Custom Paper Type

The following describes the procedure used to set a user-defined paper type for the printer. Eight custom user settings may be registered. After having been set, any of these may be called up when setting the paper type for a paper source.

The paper weight and duplex path can be set (see Setting the Paper Weight on page 3-82, and Setting the Duplex Path on page 3-83) after selecting the paper type to be customized as follows. For how to reset the customized settings, see section 3.10.10 Resetting the Custom Paper Type on page 3-84.

1

2

3

4

Press the MENU key.

Press the U or V key repeatedly until Paper Handling > appears.

Paper Handling >

Press the Z key.

Press the U or V key repeatedly until >Type Adjust > appears.

>Type Adjust >

Custom 1

5	Press the ENTER key. A blinking question mark (?) appears.
			>Type Adjust
		? Custom 1
6	Press the U or V key to display the desired paper type. The display changes as
	shown below.
	Custom 1 (to 8)
	Plain
	Transparency
	Preprinted
	Labels
	Bond
	Recycled
	Vellum
	Rough
	Letterhead
	Color
	Prepunched
	Envelope
	Cardstock
	Coated
	Thick
	High quality
7	When the paper type to be customized is displayed, press the ENTER key.

3-81