Kyocera FS-C5016N manual Duplex path Enable, Duplex path ? Enable, Setting the Duplex Path

3.10 Paper Handling

Setting the Duplex Path

To use this function, the optional duplexer must be installed on the printer.

Note

If the optional duplexer is installed on the printer, you can set whether or not to enable duplex printing as follows. The default setting is Enable.

1	Display the custom paper type (see section 3.10.9 Creating Custom Paper Type on
	page 3-81) and press the Z key.
2	Press the U or V key repeatedly until >>Duplex path appears.
		>>Duplex path
			Enable
3
	Press the ENTER key. A blinking question mark (?) appears.
			>>Duplex path
		? Enable
4	Select Enable or Disable using the U or V key. For details of the default setting
	for each paper type, see Chapter 2 Handling Paper, section 2.5 Paper Type on page
	2-21.

5

6

Press the ENTER key.

Press the MENU key. The display returns to Ready.

The custom paper type setting is completed.

3-83