Kyocera FS-C5016N manual Rear, Air is purged through these vents to cool down the inside

1.2 Parts and Functions

1.2.4Rear

1 1

		5	8
1
3			6
4	7	2

Figure 1-4

1Vents

Air is purged through these vents to cool down the inside.

2USB Interface Connector

This connector is a USB interface that conforms to the Full-Speed USB 2.0. Use a USB cable between this connector and the USB port on a computer.

3Memory Card Slot

This slot receives a memory card. A memory card can hold fonts, macros, forms, etc., that can be downloaded in the printer’s memory. For details, see Appendix A Options, section A.3.1 Memory Card on page A-7.

4Power Cord Connector

This connector accepts the power cord supplied with the printer.

5Network indicators

These indicators light according to the communication status with the network. Right: 10BASE-T/100BASE-TX indicator

Lights when you are connected to the network at 10 Mbps or 100 Mbps. Left: Status indicator

Flashes during data communication.

6Network Interface Connector

Connects to the network via a 10BASE-T/100BASE-TX network cable.

7Parallel Interface Connector

This connector is for a standard Centronics parallel interface cable from the computer. Connect this connector to the computer’s parallel port.

8Option Interface Slot (Network/Serial)

This slot can be used to hold the optional network interface card, a hard disk or the serial interface board kit. For details, see Appendix A Options.

1-8