Kyocera FS-C5016N manual Operating the Storage Device, Using the Memory Card, Read Fonts ?

3.9 Operating the Storage Device

3.9Operating the Storage Device

The printer supports three types of storage device; memory card, optional hard disk, and RAM disk. The memory card and optional hard disk are installed into the dedicated slots of the printer. The RAM disk is an allocated part of the printer’s memory. If the optional hard disk is installed in the printer, the e-MPS function will be available. For details, see e-MPS on page 3-20.

The basic operations of each storage device are the same. This section mainly explains the operation of the memory card.

3.9.1Using the Memory Card

The printer is equipped with a slot for a memory card. By inserting a memory card into the printer, the following operations become available.

•Reading Font Data

•Reading Data

•Writing Data

•Deleting Data

•Formatting Memory Card

•Printing a List of Data Names

For details about the handling of the memory card, see Appendix A Options, section A.3.1

Memory Card on page A-7.

Reading Font Data

In case of a memory card if a memory with the font data card is already inserted into the slot when the printer is turned on, the fonts are automatically read into the printer. To read fonts into the printer from a memory card, proceed as follows.

1

2

3

4

5

Press the MENU key.

Press the U or V key repeatedly until Memory Card > appears.

Memory Card >

Press the Z key.

Press the U or V key repeatedly until >Read Fonts appears.

>Read Fonts

Press the ENTER key. A question mark (?) appears.

>Read Fonts ?

3-59