Kyocera FS-C5016N manual Adjust Cyan =-2 H= 00 R=, =-2 H= 00 R=+1

3.13 Other Modes

11	Look at the left chart (L) in the cyan portion of the color registration correction chart.
	Find the two lines that most seem to overlap as a single straight line and note the

number value listed there. In the example below the value would be -2. (Be careful of plus [+] and minus[-] numbers.)

-9 -8 -7 -6 -5 -4 -3 -2 -1

0 L

+1

+2

+3

+4

+5

+6

+7

+8

+9

Figure 3-17

Color Registration Correction Chart

12	Press the U or V key until that value is displayed.
		>>Adjust Cyan
		L=-2 H= 00 R= 0
13
	Use the Z and Y keys to move the cursor right and left. Perform the same operation
	as you did for the left (L) value in order to find the horizontal (H) and right (R) values

for cyan in the color registration correction chart, and select those values on the operator panel as well.

14

15

Press the ENTER key. OK? and each of the entered values will be displayed. If the displayed values are correct, press the ENTER key.

OK?

L=-2 H= 00 R=+1

Press the V key. >>Adjust Magenta will be displayed and, once you complete the settings for that color, >>Adjust Yellow will be displayed as well. Perform the same operation as you did for the cyan chart in order to find the values for magenta and yellow in the color registration correction chart, and perform those settings in the same way.

16	Once you have completed the settings for all 3 colors, press the MENU key. The
	display returns to Ready.

If the problem of skewed-color printout still persists even after correcting the color registration, call for service.

Caution

3-102