Kyocera FS-C5016N manual Changing e-MPS Configuration, Quick Copy, Left

3.4 e-MPS

3.4.5Changing e-MPS Configuration

You can change the following parameters for e-MPS operation:

•Maximum number of Quick Copy/Proof-and-Hold jobs

•Maximum space assigned to temporary code jobs

•Maximum space assigned to permanent code jobs

•Maximum space assigned to virtual mailboxes

The total amount of storage areas specified must not exceed the total size of the hard disk. Otherwise, you may only be able to accommodate print jobs of a smaller amount of print jobs than specified.

Note

Changing the Maximum Number of Quick Copy/Proof-and-Hold Jobs

This changes maximum number of Quick Copy/Proof-and-Hold jobs from 0 to 50. The default is 32.

1

2

3

4

Press the MENU key.

Press the U or V key repeatedly until e-MPS > appears.

e-MPS >

Press the Z key.

Press the U or V key repeatedly until >e-MPS Configuration > appears.

>e-MPS > Configuration

5

6

Press the Z key.

Press the U or V key repeatedly until >>Quick Copy appears.

>>Quick Copy

32

7	Press the ENTER key. A blinking cursor (_) appears.
		>>Quick Copy
		32
8	Press the U or V key to increase or decrease the value at the blinking cursor. The
	value can be set between 0 and 50. Use the Z and Y keys to move the cursor right
	and left.
9	When the desired maximum number of jobs is set, press the ENTER key.

3-30