Kyocera FS-C5016N Automatic Form Feed Timeout Setting, Form Feed Time Out 030sec, Following order

3.13 Other Modes

6	Press the U or V key. The display cycles through the available selection in the
	following order:

7

8

English

Francais

Deutsch

Italiano

Nederlands

Español

Português

Press the ENTER key.

Press the MENU key. The display returns to Ready.

3.13.2 Automatic Form Feed Timeout Setting

If the printer receives no data for a certain period, it will time out and release the current interface. It prints whatever data it has in its buffer and feeds out the page. The default form feed timeout time is 30 seconds. You can adjust the time-out time as follows:

1

2

3

4

Press the MENU key.

Press the U or V key repeatedly until Others > appears.

Others >

Press the Z key.

Press the U or V key repeatedly until >Form Feed Time Out appears.

>Form Feed

Time Out 030sec.

5	To change the timeout time, press the ENTER key. A blinking cursor (_) appears.
		>Form Feed
		Time Out 030sec.
6	Press the U or V key to increase or decrease the value at the blinking cursor and set
	the desired time. The timeout time can be between 0 and 495 seconds, in 5-second

increments. Use the Z and Y keys to move the cursor right and left.

7

8

When the desired timeout time is displayed, press the ENTER key.

To exit the menu selection, press the MENU key.

3-90