Kyocera FS-C5016N manual Indicators in Message Display, Ready, Error codes

	3.1 Understanding the Operator Panel
Message	Meaning
Sleeping	The printer is in sleep mode. The printer wakes from sleep mode
	whenever a key on the operator panel is pressed, the cover is
	opened or closed, or a print job is received. The printer then
	warms up and goes on-line. For details on sleep mode, see Sleep
	Timer Timeout Time on page 3-92.
Cancelling data	Jobs inside the printer are being canceled. To cancel a job, see sec-
	tion 3.1.3 Keys on page 3-6.
Waiting	The printer is waiting for the rest of print job before completing
	the last page. Pressing the GO key allows you to obtain the last
	page immediately. See below.
FormFeed TimeOut	The printer is printing the last page after a waiting period.
Table 3-1 (Continued)

Error codes

See Chapter 4 Troubleshooting.

3.1.2Indicators in Message Display

Ready

PAR A4 PLAIN

READY

DATA

INTERFACE SIZE TYPE

ATTENTION

Figure 3-2

Interface Indicator (INTERFACE)

The interface indicator shows the interface that is currently in use:

PAR	Parallel interface is in use.
USB	USB interface is in use.
SER	Serial (RS-232C) interface is in use. (option)
NET	Network interface is in use.
OPT	Network interface is in use. (option)

---No interface is in use.

Each interface has a timeout time of 30 seconds during which the other interface should wait to receive a print job. Even a print job has been complete on the interface, you should wait for this period until the other interface begins printing the job.

3-3