Kyocera FS-C5016N Temp. Code JOB Size 1550MB, Press the Menu key. The display returns to Ready

3.4 e-MPS

10 Press the MENU key. The display returns to Ready.

Maximum Space Assigned to Temporary Code Jobs

This changes the hard disk space that holds temporary code jobs. You can change the maximum space from 0 to 9999 (megabytes). The actual maximum size depends on the size of free hard disk space, however. The default size is 1/6 of the total hard disk space, rounded off in unit of 50 MB. For example, if the total hard disk space is 10 GB, the default size is 1550 MB.

1

2

3

4

Press the MENU key.

Press the U or V key repeatedly until e-MPS > appears.

e-MPS >

Press the Z key.

Press the U or V key repeatedly until >e-MPS Configuration > appears.

>e-MPS > Configuration

5

6

Press the Z key.

Press the U or V key repeatedly until >>Temp. Code JOB Size appears.

>>Temp. Code JOB

Size 1550MB

7	To change the maximum disk space, press the ENTER key. A blinking cursor (_)
	appears.
		>>Temp. Code JOB
		Size
			1550MB
8	Press the U or V key to increase or decrease, respectively, the value at the blinking
	cursor. Use the Z and Y keys to move the cursor right and left.

9

10

When the desired size is displayed, press the ENTER key.

Press the MENU key. The display returns to Ready.

3-31